| Dir : /lib/dracut/ |
| Server: Linux ngx353.inmotionhosting.com 4.18.0-553.22.1.lve.1.el8.x86_64 #1 SMP Tue Oct 8 15:52:54 UTC 2024 x86_64 IP: 209.182.202.254 |
| Dir : //lib/dracut/dracut-init.sh |
#!/bin/bash
#
# functions used only by dracut and dracut modules
#
# Copyright 2005-2009 Red Hat, Inc. All rights reserved.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
export LC_MESSAGES=C
if [[ "$EUID" = "0" ]]; then
export DRACUT_CP="cp --reflink=auto --sparse=auto --preserve=mode,timestamps,xattr,links -dfr"
else
export DRACUT_CP="cp --reflink=auto --sparse=auto --preserve=mode,timestamps,links -dfr"
fi
# is_func <command>
# Check whether $1 is a function.
is_func() {
[[ "$(type -t "$1")" = "function" ]]
}
if ! [[ $dracutbasedir ]]; then
dracutbasedir=${BASH_SOURCE[0]%/*}
[[ $dracutbasedir = dracut-functions* ]] && dracutbasedir="."
[[ $dracutbasedir ]] || dracutbasedir="."
dracutbasedir="$(readlink -f $dracutbasedir)"
fi
if ! is_func dinfo >/dev/null 2>&1; then
. "$dracutbasedir/dracut-logger.sh"
dlog_init
fi
if ! [[ $initdir ]]; then
dfatal "initdir not set"
exit 1
fi
if ! [[ -d $initdir ]]; then
mkdir -p "$initdir"
fi
if ! [[ $kernel ]]; then
kernel=$(uname -r)
export kernel
fi
srcmods="/lib/modules/$kernel/"
[[ $drivers_dir ]] && {
if ! command -v kmod &>/dev/null && vercmp "$(modprobe --version | cut -d' ' -f3)" lt 3.7; then
dfatal 'To use --kmoddir option module-init-tools >= 3.7 is required.'
exit 1
fi
srcmods="$drivers_dir"
}
export srcmods
[[ $DRACUT_FIRMWARE_PATH ]] || export DRACUT_FIRMWARE_PATH="/lib/firmware/updates:/lib/firmware:/lib/firmware/$kernel"
# export standard hookdirs
[[ $hookdirs ]] || {
hookdirs="cmdline pre-udev pre-trigger netroot "
hookdirs+="initqueue initqueue/settled initqueue/online initqueue/finished initqueue/timeout "
hookdirs+="pre-mount pre-pivot cleanup mount "
hookdirs+="emergency shutdown-emergency pre-shutdown shutdown "
export hookdirs
}
DRACUT_LDD=${DRACUT_LDD:-ldd}
DRACUT_TESTBIN=${DRACUT_TESTBIN:-/bin/sh}
DRACUT_LDCONFIG=${DRACUT_LDCONFIG:-ldconfig}
. $dracutbasedir/dracut-functions.sh
# Detect lib paths
if ! [[ $libdirs ]] ; then
if [[ "$(ldd /bin/sh)" == */lib64/* ]] &>/dev/null \
&& [[ -d /lib64 ]]; then
libdirs+=" /lib64"
[[ -d /usr/lib64 ]] && libdirs+=" /usr/lib64"
else
libdirs+=" /lib"
[[ -d /usr/lib ]] && libdirs+=" /usr/lib"
fi
libdirs+=" $(ldconfig_paths)"
export libdirs
fi
# helper function for check() in module-setup.sh
# to check for required installed binaries
# issues a standardized warning message
require_binaries() {
local _module_name="${moddir##*/}"
local _ret=0
if [[ "$1" = "-m" ]]; then
_module_name="$2"
shift 2
fi
for cmd in "$@"; do
if ! find_binary "$cmd" &>/dev/null; then
dinfo "dracut module '${_module_name#[0-9][0-9]}' will not be installed, because command '$cmd' could not be found!"
((_ret++))
fi
done
return $_ret
}
require_any_binary() {
local _module_name="${moddir##*/}"
local _ret=1
if [[ "$1" = "-m" ]]; then
_module_name="$2"
shift 2
fi
for cmd in "$@"; do
if find_binary "$cmd" &>/dev/null; then
_ret=0
break
fi
done
if (( $_ret != 0 )); then
dinfo "$_module_name: Could not find any command of '$@'!"
return 1
fi
return 0
}
dracut_need_initqueue() {
>"$initdir/lib/dracut/need-initqueue"
}
dracut_module_included() {
[[ " $mods_to_load $modules_loaded " == *\ $*\ * ]]
}
dracut_no_switch_root() {
>"$initdir/lib/dracut/no-switch-root"
}
dracut_module_path() {
echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; }
}
if ! [[ $DRACUT_INSTALL ]]; then
DRACUT_INSTALL=$(find_binary dracut-install)
fi
if ! [[ $DRACUT_INSTALL ]] && [[ -x $dracutbasedir/dracut-install ]]; then
DRACUT_INSTALL=$dracutbasedir/dracut-install
elif ! [[ $DRACUT_INSTALL ]] && [[ -x $dracutbasedir/install/dracut-install ]]; then
DRACUT_INSTALL=$dracutbasedir/install/dracut-install
fi
if ! [[ -x $DRACUT_INSTALL ]]; then
dfatal "dracut-install not found!"
exit 10
fi
if [[ $hostonly == "-h" ]]; then
if ! [[ $DRACUT_KERNEL_MODALIASES ]] || ! [[ -f "$DRACUT_KERNEL_MODALIASES" ]]; then
export DRACUT_KERNEL_MODALIASES="${DRACUT_TMPDIR}/modaliases"
$DRACUT_INSTALL ${srcmods:+--kerneldir "$srcmods"} --modalias > "$DRACUT_KERNEL_MODALIASES"
fi
fi
[[ $DRACUT_RESOLVE_LAZY ]] || export DRACUT_RESOLVE_DEPS=1
inst_dir() {
[[ -e ${initdir}/"$1" ]] && return 0 # already there
$DRACUT_INSTALL ${initdir:+-D "$initdir"} -d "$@"
(($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} -d "$@" || :
}
inst() {
local _hostonly_install
if [[ "$1" == "-H" ]]; then
_hostonly_install="-H"
shift
fi
[[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there
$DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@"
(($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || :
}
inst_simple() {
local _hostonly_install
if [[ "$1" == "-H" ]]; then
_hostonly_install="-H"
shift
fi
[[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there
[[ -e $1 ]] || return 1 # no source
$DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${_hostonly_install:+-H} "$@"
(($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${_hostonly_install:+-H} "$@" || :
}
inst_symlink() {
local _hostonly_install
if [[ "$1" == "-H" ]]; then
_hostonly_install="-H"
shift
fi
[[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there
[[ -L $1 ]] || return 1
$DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@"
(($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || :
}
inst_multiple() {
local _ret
$DRACUT_INSTALL ${initdir:+-D "$initdir"} -a ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@"
_ret=$?
(($_ret != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} -a ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || :
return $_ret
}
dracut_install() {
inst_multiple "$@"
}
dracut_instmods() {
local _silent=0;
local i;
[[ $no_kernel = yes ]] && return
for i in "$@"; do
[[ $i == "--silent" ]] && _silent=1
done
$DRACUT_INSTALL \
${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${hostonly:+-H} ${omit_drivers:+-N "$omit_drivers"} ${srcmods:+--kerneldir "$srcmods"} -m "$@"
(($? != 0)) && (($_silent == 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${hostonly:+-H} ${omit_drivers:+-N "$omit_drivers"} ${srcmods:+--kerneldir "$srcmods"} -m "$@" || :
}
inst_library() {
local _hostonly_install
if [[ "$1" == "-H" ]]; then
_hostonly_install="-H"
shift
fi
[[ -e ${initdir}/"${2:-$1}" ]] && return 0 # already there
[[ -e $1 ]] || return 1 # no source
$DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@"
(($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} ${_hostonly_install:+-H} "$@" || :
}
inst_binary() {
$DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@"
(($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@" || :
}
inst_script() {
$DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@"
(($? != 0)) && derror FAILED: $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$@" || :
}
inst_fsck_help() {
local _helper="/run/dracut/fsck/fsck_help_$1.txt"
$DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$2" $_helper
(($? != 0)) && derror $DRACUT_INSTALL ${initdir:+-D "$initdir"} ${loginstall:+-L "$loginstall"} ${DRACUT_RESOLVE_DEPS:+-l} ${DRACUT_FIPS_MODE:+-f} "$2" $_helper || :
}
# Use with form hostonly="$(optional_hostonly)" inst_xxxx <args>
# If hosotnly mode is set to "strict", hostonly restrictions will still
# be applied, else will ignore hostonly mode and try to install all
# given modules.
optional_hostonly() {
if [[ $hostonly_mode = "strict" ]]; then
printf -- "$hostonly"
else
printf ""
fi
}
mark_hostonly() {
for i in "$@"; do
echo "$i" >> "$initdir/lib/dracut/hostonly-files"
done
}
# find symlinks linked to given library file
# $1 = library file
# Function searches for symlinks by stripping version numbers appended to
# library filename, checks if it points to the same target and finally
# prints the list of symlinks to stdout.
#
# Example:
# rev_lib_symlinks libfoo.so.8.1
# output: libfoo.so.8 libfoo.so
# (Only if libfoo.so.8 and libfoo.so exists on host system.)
rev_lib_symlinks() {
[[ ! $1 ]] && return 0
local fn="$1" orig="$(readlink -f "$1")" links=''
[[ ${fn} == *.so.* ]] || return 1
until [[ ${fn##*.} == so ]]; do
fn="${fn%.*}"
[[ -L ${fn} && $(readlink -f "${fn}") == ${orig} ]] && links+=" ${fn}"
done
echo "${links}"
}
# attempt to install any programs specified in a udev rule
inst_rule_programs() {
local _prog _bin
for _prog in $(sed -nr 's/.*PROGRAM==?"([^ "]+).*/\1/p' "$1"); do
_bin=""
if [ -x ${udevdir}/$_prog ]; then
_bin=${udevdir}/$_prog
elif [[ "${_prog/\$env\{/}" == "$_prog" ]]; then
_bin=$(find_binary "$_prog") || {
dinfo "Skipping program $_prog using in udev rule ${1##*/} as it cannot be found"
continue;
}
fi
[[ $_bin ]] && inst_binary "$_bin"
done
for _prog in $(sed -nr 's/.*RUN[+=]=?"([^ "]+).*/\1/p' "$1"); do
_bin=""
if [ -x ${udevdir}/$_prog ]; then
_bin=${udevdir}/$_prog
elif [[ "${_prog/\$env\{/}" == "$_prog" ]] && [[ "${_prog}" != "/sbin/initqueue" ]]; then
_bin=$(find_binary "$_prog") || {
dinfo "Skipping program $_prog using in udev rule ${1##*/} as it cannot be found"
continue;
}
fi
[[ $_bin ]] && inst_binary "$_bin"
done
for _prog in $(sed -nr 's/.*IMPORT\{program\}==?"([^ "]+).*/\1/p' "$1"); do
_bin=""
if [ -x ${udevdir}/$_prog ]; then
_bin=${udevdir}/$_prog
elif [[ "${_prog/\$env\{/}" == "$_prog" ]]; then
_bin=$(find_binary "$_prog") || {
dinfo "Skipping program $_prog using in udev rule ${1##*/} as it cannot be found"
continue;
}
fi
[[ $_bin ]] && dracut_install "$_bin"
done
}
# attempt to install any programs specified in a udev rule
inst_rule_group_owner() {
local i
for i in $(sed -nr 's/.*OWNER=?"([^ "]+).*/\1/p' "$1"); do
if ! grep -Eq "^$i:" "$initdir/etc/passwd" 2>/dev/null; then
grep -E "^$i:" /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
fi
done
for i in $(sed -nr 's/.*GROUP=?"([^ "]+).*/\1/p' "$1"); do
if ! grep -Eq "^$i:" "$initdir/etc/group" 2>/dev/null; then
grep -E "^$i:" /etc/group 2>/dev/null >> "$initdir/etc/group"
fi
done
}
inst_rule_initqueue() {
if grep -q -F initqueue "$1"; then
dracut_need_initqueue
fi
}
# udev rules always get installed in the same place, so
# create a function to install them to make life simpler.
inst_rules() {
local _target=/etc/udev/rules.d _rule _found
inst_dir "${udevdir}/rules.d"
inst_dir "$_target"
for _rule in "$@"; do
if [ "${_rule#/}" = "$_rule" ]; then
for r in ${udevdir}/rules.d ${hostonly:+/etc/udev/rules.d}; do
[[ -e $r/$_rule ]] || continue
_found="$r/$_rule"
inst_rule_programs "$_found"
inst_rule_group_owner "$_found"
inst_rule_initqueue "$_found"
inst_simple "$_found"
done
fi
for r in '' $dracutbasedir/rules.d/; do
# skip rules without an absolute path
[[ "${r}$_rule" != /* ]] && continue
[[ -f ${r}$_rule ]] || continue
_found="${r}$_rule"
inst_rule_programs "$_found"
inst_rule_group_owner "$_found"
inst_rule_initqueue "$_found"
inst_simple "$_found" "$_target/${_found##*/}"
done
[[ $_found ]] || dinfo "Skipping udev rule: $_rule"
done
}
inst_rules_wildcard() {
local _target=/etc/udev/rules.d _rule _found
inst_dir "${udevdir}/rules.d"
inst_dir "$_target"
for _rule in ${udevdir}/rules.d/$1 ${dracutbasedir}/rules.d/$1 ; do
[[ -e $_rule ]] || continue
inst_rule_programs "$_rule"
inst_rule_group_owner "$_rule"
inst_rule_initqueue "$_rule"
inst_simple "$_rule"
_found=$_rule
done
if [[ -n ${hostonly} ]] ; then
for _rule in ${_target}/$1 ; do
[[ -f $_rule ]] || continue
inst_rule_programs "$_rule"
inst_rule_group_owner "$_rule"
inst_rule_initqueue "$_rule"
inst_simple "$_rule"
_found=$_rule
done
fi
[[ $_found ]] || dinfo "Skipping udev rule: $_rule"
}
# make sure that library links are correct and up to date
build_ld_cache() {
for f in "$dracutsysrootdir"/etc/ld.so.conf "$dracutsysrootdir"/etc/ld.so.conf.d/*; do
[[ -f $f ]] && inst_simple "${f#$dracutsysrootdir}"
done
if ! ldconfig -r "$initdir" -f /etc/ld.so.conf; then
if [[ $EUID == 0 ]]; then
derror "ldconfig exited ungracefully"
else
derror "ldconfig might need uid=0 (root) for chroot()"
fi
fi
}
prepare_udev_rules() {
[ -z "$UDEVVERSION" ] && export UDEVVERSION=$(udevadm --version | { read v _ ; echo $v ; })
for f in "$@"; do
f="${initdir}/etc/udev/rules.d/$f"
[ -e "$f" ] || continue
while read line || [ -n "$line" ]; do
if [ "${line%%IMPORT PATH_ID}" != "$line" ]; then
if [ $UDEVVERSION -ge 174 ]; then
printf '%sIMPORT{builtin}="path_id"\n' "${line%%IMPORT PATH_ID}"
else
printf '%sIMPORT{program}="path_id %%p"\n' "${line%%IMPORT PATH_ID}"
fi
elif [ "${line%%IMPORT BLKID}" != "$line" ]; then
if [ $UDEVVERSION -ge 176 ]; then
printf '%sIMPORT{builtin}="blkid"\n' "${line%%IMPORT BLKID}"
else
printf '%sIMPORT{program}="/sbin/blkid -o udev -p $tempnode"\n' "${line%%IMPORT BLKID}"
fi
else
echo "$line"
fi
done < "${f}" > "${f}.new"
mv "${f}.new" "$f"
done
}
# install function specialized for hooks
# $1 = type of hook, $2 = hook priority (lower runs first), $3 = hook
# All hooks should be POSIX/SuS compliant, they will be sourced by init.
inst_hook() {
if ! [[ -f $3 ]]; then
dfatal "Cannot install a hook ($3) that does not exist."
dfatal "Aborting initrd creation."
exit 1
elif ! [[ "$hookdirs" == *$1* ]]; then
dfatal "No such hook type $1. Aborting initrd creation."
exit 1
fi
inst_simple "$3" "/lib/dracut/hooks/${1}/${2}-${3##*/}"
}
# install any of listed files
#
# If first argument is '-d' and second some destination path, first accessible
# source is installed into this path, otherwise it will installed in the same
# path as source. If none of listed files was installed, function return 1.
# On first successful installation it returns with 0 status.
#
# Example:
#
# inst_any -d /bin/foo /bin/bar /bin/baz
#
# Lets assume that /bin/baz exists, so it will be installed as /bin/foo in
# initramfs.
inst_any() {
local to f
[[ $1 = '-d' ]] && to="$2" && shift 2
for f in "$@"; do
[[ -e $f ]] || continue
[[ $to ]] && inst "$f" "$to" && return 0
inst "$f" && return 0
done
return 1
}
# inst_libdir_file [-n <pattern>] <file> [<file>...]
# Install a <file> located on a lib directory to the initramfs image
# -n <pattern> install matching files
inst_libdir_file() {
local _files
if [[ "$1" == "-n" ]]; then
local _pattern=$2
shift 2
for _dir in $libdirs; do
for _i in "$@"; do
for _f in "$_dir"/$_i; do
[[ "$_f" =~ $_pattern ]] || continue
[[ -e "$_f" ]] && _files+="$_f "
done
done
done
else
for _dir in $libdirs; do
for _i in "$@"; do
for _f in "$_dir"/$_i; do
[[ -e "$_f" ]] && _files+="$_f "
done
done
done
fi
[[ $_files ]] && inst_multiple $_files
}
# install function decompressing the target and handling symlinks
# $@ = list of compressed (gz or bz2) files or symlinks pointing to such files
#
# Function install targets in the same paths inside overlay but decompressed
# and without extensions (.gz, .bz2).
inst_decompress() {
local _src _cmd
for _src in $@
do
case ${_src} in
*.gz) _cmd='gzip -f -d' ;;
*.bz2) _cmd='bzip2 -d' ;;
*) return 1 ;;
esac
inst_simple ${_src}
# Decompress with chosen tool. We assume that tool changes name e.g.
# from 'name.gz' to 'name'.
${_cmd} "${initdir}${_src}"
done
}
# It's similar to above, but if file is not compressed, performs standard
# install.
# $@ = list of files
inst_opt_decompress() {
local _src
for _src in $@; do
inst_decompress "${_src}" || inst "${_src}"
done
}
# module_check <dracut module>
# execute the check() function of module-setup.sh of <dracut module>
# or the "check" script, if module-setup.sh is not found
# "check $hostonly" is called
module_check() {
local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
local _ret
local _forced=0
local _hostonly=$hostonly
[ $# -eq 2 ] && _forced=$2
[[ -d $_moddir ]] || return 1
if [[ ! -f $_moddir/module-setup.sh ]]; then
# if we do not have a check script, we are unconditionally included
[[ -x $_moddir/check ]] || return 0
[ $_forced -ne 0 ] && unset hostonly
$_moddir/check $hostonly
_ret=$?
else
unset check depends cmdline install installkernel
check() { true; }
. $_moddir/module-setup.sh
is_func check || return 0
[ $_forced -ne 0 ] && unset hostonly
moddir=$_moddir check $hostonly
_ret=$?
unset check depends cmdline install installkernel
fi
hostonly=$_hostonly
return $_ret
}
# module_check_mount <dracut module>
# execute the check() function of module-setup.sh of <dracut module>
# or the "check" script, if module-setup.sh is not found
# "mount_needs=1 check 0" is called
module_check_mount() {
local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
local _ret
mount_needs=1
[[ -d $_moddir ]] || return 1
if [[ ! -f $_moddir/module-setup.sh ]]; then
# if we do not have a check script, we are unconditionally included
[[ -x $_moddir/check ]] || return 0
mount_needs=1 $_moddir/check 0
_ret=$?
else
unset check depends cmdline install installkernel
check() { false; }
. $_moddir/module-setup.sh
moddir=$_moddir check 0
_ret=$?
unset check depends cmdline install installkernel
fi
unset mount_needs
return $_ret
}
# module_depends <dracut module>
# execute the depends() function of module-setup.sh of <dracut module>
# or the "depends" script, if module-setup.sh is not found
module_depends() {
local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
local _ret
[[ -d $_moddir ]] || return 1
if [[ ! -f $_moddir/module-setup.sh ]]; then
# if we do not have a check script, we have no deps
[[ -x $_moddir/check ]] || return 0
$_moddir/check -d
return $?
else
unset check depends cmdline install installkernel
depends() { true; }
. $_moddir/module-setup.sh
moddir=$_moddir depends
_ret=$?
unset check depends cmdline install installkernel
return $_ret
fi
}
# module_cmdline <dracut module>
# execute the cmdline() function of module-setup.sh of <dracut module>
# or the "cmdline" script, if module-setup.sh is not found
module_cmdline() {
local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
local _ret
[[ -d $_moddir ]] || return 1
if [[ ! -f $_moddir/module-setup.sh ]]; then
[[ -x $_moddir/cmdline ]] && . "$_moddir/cmdline"
return $?
else
unset check depends cmdline install installkernel
cmdline() { true; }
. $_moddir/module-setup.sh
moddir=$_moddir cmdline
_ret=$?
unset check depends cmdline install installkernel
return $_ret
fi
}
# module_install <dracut module>
# execute the install() function of module-setup.sh of <dracut module>
# or the "install" script, if module-setup.sh is not found
module_install() {
local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
local _ret
[[ -d $_moddir ]] || return 1
if [[ ! -f $_moddir/module-setup.sh ]]; then
[[ -x $_moddir/install ]] && . "$_moddir/install"
return $?
else
unset check depends cmdline install installkernel
install() { true; }
. $_moddir/module-setup.sh
moddir=$_moddir install
_ret=$?
unset check depends cmdline install installkernel
return $_ret
fi
}
# module_installkernel <dracut module>
# execute the installkernel() function of module-setup.sh of <dracut module>
# or the "installkernel" script, if module-setup.sh is not found
module_installkernel() {
local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
local _ret
[[ -d $_moddir ]] || return 1
if [[ ! -f $_moddir/module-setup.sh ]]; then
[[ -x $_moddir/installkernel ]] && . "$_moddir/installkernel"
return $?
else
unset check depends cmdline install installkernel
installkernel() { true; }
. $_moddir/module-setup.sh
moddir=$_moddir installkernel
_ret=$?
unset check depends cmdline install installkernel
return $_ret
fi
}
# check_mount <dracut module>
# check_mount checks, if a dracut module is needed for the given
# device and filesystem types in "${host_fs_types[@]}"
check_mount() {
local _mod=$1
local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
local _ret
local _moddep
[ "${#host_fs_types[@]}" -le 0 ] && return 1
# If we are already scheduled to be loaded, no need to check again.
[[ " $mods_to_load " == *\ $_mod\ * ]] && return 0
[[ " $mods_checked_as_dep " == *\ $_mod\ * ]] && return 1
# This should never happen, but...
[[ -d $_moddir ]] || return 1
[[ $2 ]] || mods_checked_as_dep+=" $_mod "
if [[ " $omit_dracutmodules " == *\ $_mod\ * ]]; then
return 1
fi
if [[ " $dracutmodules $add_dracutmodules $force_add_dracutmodules" == *\ $_mod\ * ]]; then
module_check_mount $_mod; ret=$?
# explicit module, so also accept ret=255
[[ $ret = 0 || $ret = 255 ]] || return 1
else
# module not in our list
if [[ $dracutmodules = all ]]; then
# check, if we can and should install this module
module_check_mount $_mod || return 1
else
# skip this module
return 1
fi
fi
for _moddep in $(module_depends $_mod); do
# handle deps as if they were manually added
[[ " $dracutmodules " == *\ $_mod\ * ]] \
&& [[ " $dracutmodules " != *\ $_moddep\ * ]] \
&& dracutmodules+=" $_moddep "
[[ " $add_dracutmodules " == *\ $_mod\ * ]] \
&& [[ " $add_dracutmodules " != *\ $_moddep\ * ]] \
&& add_dracutmodules+=" $_moddep "
[[ " $force_add_dracutmodules " == *\ $_mod\ * ]] \
&& [[ " $force_add_dracutmodules " != *\ $_moddep\ * ]] \
&& force_add_dracutmodules+=" $_moddep "
# if a module we depend on fail, fail also
if ! check_module $_moddep; then
derror "dracut module '$_mod' depends on '$_moddep', which can't be installed"
return 1
fi
done
[[ " $mods_to_load " == *\ $_mod\ * ]] || \
mods_to_load+=" $_mod "
return 0
}
# check_module <dracut module> [<use_as_dep>]
# check if a dracut module is to be used in the initramfs process
# if <use_as_dep> is set, then the process also keeps track
# that the modules were checked for the dependency tracking process
check_module() {
local _mod=$1
local _moddir=$(echo ${dracutbasedir}/modules.d/??${1} | { read a b; echo "$a"; })
local _ret
local _moddep
# If we are already scheduled to be loaded, no need to check again.
[[ " $mods_to_load " == *\ $_mod\ * ]] && return 0
[[ " $mods_checked_as_dep " == *\ $_mod\ * ]] && return 1
# This should never happen, but...
[[ -d $_moddir ]] || return 1
[[ $2 ]] || mods_checked_as_dep+=" $_mod "
if [[ " $omit_dracutmodules " == *\ $_mod\ * ]]; then
dinfo "dracut module '$_mod' will not be installed, because it's in the list to be omitted!"
return 1
fi
if [[ " $dracutmodules $add_dracutmodules $force_add_dracutmodules" == *\ $_mod\ * ]]; then
if [[ " $dracutmodules $force_add_dracutmodules " == *\ $_mod\ * ]]; then
module_check $_mod 1; ret=$?
else
module_check $_mod 0; ret=$?
fi
# explicit module, so also accept ret=255
[[ $ret = 0 || $ret = 255 ]] || return 1
else
# module not in our list
if [[ $dracutmodules = all ]]; then
# check, if we can and should install this module
module_check $_mod; ret=$?
if [[ $ret != 0 ]]; then
[[ $2 ]] && return 1
[[ $ret != 255 ]] && return 1
fi
else
# skip this module
return 1
fi
fi
for _moddep in $(module_depends $_mod); do
# handle deps as if they were manually added
[[ " $dracutmodules " == *\ $_mod\ * ]] \
&& [[ " $dracutmodules " != *\ $_moddep\ * ]] \
&& dracutmodules+=" $_moddep "
[[ " $add_dracutmodules " == *\ $_mod\ * ]] \
&& [[ " $add_dracutmodules " != *\ $_moddep\ * ]] \
&& add_dracutmodules+=" $_moddep "
[[ " $force_add_dracutmodules " == *\ $_mod\ * ]] \
&& [[ " $force_add_dracutmodules " != *\ $_moddep\ * ]] \
&& force_add_dracutmodules+=" $_moddep "
# if a module we depend on fail, fail also
if ! check_module $_moddep; then
derror "dracut module '$_mod' depends on '$_moddep', which can't be installed"
return 1
fi
done
[[ " $mods_to_load " == *\ $_mod\ * ]] || \
mods_to_load+=" $_mod "
return 0
}
# for_each_module_dir <func>
# execute "<func> <dracut module> 1"
for_each_module_dir() {
local _modcheck
local _mod
local _moddir
local _func
_func=$1
for _moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
[[ -d $_moddir ]] || continue;
[[ -e $_moddir/install || -e $_moddir/installkernel || \
-e $_moddir/module-setup.sh ]] || continue
_mod=${_moddir##*/}; _mod=${_mod#[0-9][0-9]}
$_func $_mod 1
done
# Report any missing dracut modules, the user has specified
_modcheck="$add_dracutmodules $force_add_dracutmodules"
[[ $dracutmodules != all ]] && _modcheck="$_modcheck $dracutmodules"
for _mod in $_modcheck; do
[[ " $mods_to_load " == *\ $_mod\ * ]] && continue
[[ " $force_add_dracutmodules " != *\ $_mod\ * ]] \
&& [[ " $dracutmodules " != *\ $_mod\ * ]] \
&& [[ " $omit_dracutmodules " == *\ $_mod\ * ]] \
&& continue
derror "dracut module '$_mod' cannot be found or installed."
[[ " $force_add_dracutmodules " == *\ $_mod\ * ]] && exit 1
[[ " $dracutmodules " == *\ $_mod\ * ]] && exit 1
[[ " $add_dracutmodules " == *\ $_mod\ * ]] && exit 1
done
}
# Install a single kernel module along with any firmware it may require.
# $1 = full path to kernel module to install
install_kmod_with_fw() {
# no need to go further if the module is already installed
[[ -e "${initdir}/lib/modules/$kernel/${1##*/lib/modules/$kernel/}" ]] \
&& return 0
if [[ $omit_drivers ]]; then
local _kmod=${1##*/}
_kmod=${_kmod%.ko*}
_kmod=${_kmod/-/_}
if [[ "$_kmod" =~ $omit_drivers ]]; then
dinfo "Omitting driver $_kmod"
return 0
fi
if [[ "${1##*/lib/modules/$kernel/}" =~ $omit_drivers ]]; then
dinfo "Omitting driver $_kmod"
return 0
fi
fi
if [[ $silent_omit_drivers ]]; then
local _kmod=${1##*/}
_kmod=${_kmod%.ko*}
_kmod=${_kmod/-/_}
[[ "$_kmod" =~ $silent_omit_drivers ]] && return 0
[[ "${1##*/lib/modules/$kernel/}" =~ $silent_omit_drivers ]] && return 0
fi
inst_simple "$1" "/lib/modules/$kernel/${1##*/lib/modules/$kernel/}"
ret=$?
(($ret != 0)) && return $ret
local _modname=${1##*/} _fwdir _found _fw
_modname=${_modname%.ko*}
for _fw in $(modinfo -k $kernel -F firmware $1 2>/dev/null); do
_found=''
for _fwdir in $fw_dir; do
[[ -d $_fwdir && -f $_fwdir/$_fw ]] || continue
inst_simple "$_fwdir/$_fw" "/lib/firmware/$_fw"
_found=yes
done
if [[ $_found != yes ]]; then
if ! [[ -d $(echo /sys/module/${_modname//-/_}|{ read a b; echo $a; }) ]]; then
dinfo "Possible missing firmware \"${_fw}\" for kernel module" \
"\"${_modname}.ko\""
else
dwarn "Possible missing firmware \"${_fw}\" for kernel module" \
"\"${_modname}.ko\""
fi
fi
done
return 0
}
# Do something with all the dependencies of a kernel module.
# Note that kernel modules depend on themselves using the technique we use
# $1 = function to call for each dependency we find
# It will be passed the full path to the found kernel module
# $2 = module to get dependencies for
# rest of args = arguments to modprobe
# _fderr specifies FD passed from surrounding scope
for_each_kmod_dep() {
local _func=$1 _kmod=$2 _cmd _modpath _options
shift 2
modprobe "$@" --ignore-install --show-depends $_kmod 2>&${_fderr} | (
while read _cmd _modpath _options || [ -n "$_cmd" ]; do
[[ $_cmd = insmod ]] || continue
$_func ${_modpath} || exit $?
done
)
}
dracut_kernel_post() {
for _f in modules.builtin.bin modules.builtin modules.order; do
[[ -e $srcmods/$_f ]] && inst_simple "$srcmods/$_f" "/lib/modules/$kernel/$_f"
done
# generate module dependencies for the initrd
if [[ -d $initdir/lib/modules/$kernel ]] && \
! depmod -a -b "$initdir" $kernel; then
dfatal "\"depmod -a $kernel\" failed."
exit 1
fi
}
instmods() {
# instmods [-c [-s]] <kernel module> [<kernel module> ... ]
# instmods [-c [-s]] <kernel subsystem>
# install kernel modules along with all their dependencies.
# <kernel subsystem> can be e.g. "=block" or "=drivers/usb/storage"
# -c check
# -s silent
local _optional="-o"
local _silent
local _ret
[[ $no_kernel = yes ]] && return
if [[ $1 = '-c' ]]; then
unset _optional
shift
fi
if [[ $1 = '-s' ]]; then
_silent=1
shift
fi
if (($# == 0)); then
read -r -d '' -a args
set -- "${args[@]}"
fi
if (($# == 0)); then
return 0
fi
$DRACUT_INSTALL \
${initdir:+-D "$initdir"} \
${loginstall:+-L "$loginstall"} \
${hostonly:+-H} \
${omit_drivers:+-N "$omit_drivers"} \
${srcmods:+--kerneldir "$srcmods"} \
${_optional:+-o} \
${_silent:+--silent} \
-m "$@"
_ret=$?
if (($_ret != 0)) && [[ -z "$_silent" ]]; then
derror "FAILED: " \
$DRACUT_INSTALL \
${initdir:+-D "$initdir"} \
${loginstall:+-L "$loginstall"} \
${hostonly:+-H} \
${omit_drivers:+-N "$omit_drivers"} \
${srcmods:+--kerneldir "$srcmods"} \
${_optional:+-o} \
${_silent:+--silent} \
-m "$@"
fi
[[ "$optional" ]] && return 0
return $_ret
}
if [[ "$(ln --help)" == *--relative* ]]; then
ln_r() {
ln -sfnr "${initdir}/$1" "${initdir}/$2"
}
else
ln_r() {
local _source=$1
local _dest=$2
[[ -d "${_dest%/*}" ]] && _dest=$(readlink -f "${_dest%/*}")/${_dest##*/}
ln -sfn -- "$(convert_abs_rel "${_dest}" "${_source}")" "${initdir}/${_dest}"
}
fi