| Dir : /proc/self/root/opt/alt/alt-nodejs18/root/bin/ |
| Server: Linux ngx353.inmotionhosting.com 4.18.0-553.22.1.lve.1.el8.x86_64 #1 SMP Tue Oct 8 15:52:54 UTC 2024 x86_64 IP: 209.182.202.254 |
| Dir : //proc/self/root/opt/alt/alt-nodejs18/root/bin/icu-config-64 |
#!/bin/sh
## -*-sh-*-
#set -x
# BEGIN of icu-config-top
# Copyright (C) 2016 and later: Unicode, Inc. and others.
# License & terms of use: http://www.unicode.org/copyright.html
#******************************************************************************
# Copyright (C) 1999-2013, International Business Machines
# Corporation and others. All Rights Reserved.
#******************************************************************************
# This script is designed to aid configuration of ICU.
# rpath links a library search path right into the binaries.
#
# Note: it's preferred to use the .pc files rather than icu-config.
#
### END of icu-config-top
## Zero out prefix.
execprefix=
prefix=
loaddefs()
{
# Following from icu/icu4c/source/config/Makefile.inc
# Copyright (C) 2016 and later: Unicode, Inc. and others.
# License & terms of use: http://www.unicode.org/copyright.html
## -*-makefile-*-
#******************************************************************************
# Copyright (C) 1999-2014, International Business Machines
# Corporation and others. All Rights Reserved.
#******************************************************************************
# This Makefile.inc is designed to be included into projects which make use
# of the ICU.
# CONTENTS OF THIS FILE
# 1). Base configuration information and linkage
# 2). Variables giving access to ICU tools
# 3). Host information
# 4). Compiler flags and settings
# 5). Data Packaging directives
# 6). Include of platform make fragment (mh-* file)
##################################################################
#
# *1* base configuration information and linkage
#
##################################################################
# The PREFIX is the base of where ICU is installed.
# Inside this directory you should find bin, lib, include/unicode,
# etc. If ICU is not installed in this directory, you must change the
# following line. There should exist ${prefix}/include/unicode/utypes.h
# for example.
default_prefix="/opt/alt/alt-nodejs18/root/usr"
if [ "x${prefix}" = "x" ]; then prefix="$default_prefix"; fi
exec_prefix="/opt/alt/alt-nodejs18/root/usr"
libdir="/opt/alt/alt-nodejs18/root/usr/lib64"
libexecdir="/opt/alt/alt-nodejs18/root/usr/libexec"
bindir="/opt/alt/alt-nodejs18/root/usr/bin"
datarootdir="${prefix}/share"
datadir="/opt/alt/alt-nodejs18/root/usr/share"
sbindir="/opt/alt/alt-nodejs18/root/usr/sbin"
# about the ICU version
VERSION="74.2"
UNICODE_VERSION="15.1"
# The prefix for ICU libraries, normally 'icu'
ICUPREFIX="icu"
PACKAGE="icu"
LIBICU="lib${ICUPREFIX}"
# Static library prefix and file extension
STATIC_PREFIX="s"
LIBSICU="lib${STATIC_PREFIX}${ICUPREFIX}"
A="a"
# Suffix at the end of libraries. Usually empty.
ICULIBSUFFIX=""
# ICULIBSUFFIX_VERSION is non-empty if it is to contain a library
# version. For example, if it is 21, it means libraries are named
# libicuuc21.so for example.
# rpath links a library search path right into the binaries.
## mh-files MUST NOT override RPATHLDFLAGS unless they provide
## equivalent '#SH#' lines for icu-config fixup
default_ENABLE_RPATH="NO"
if [ "x${ENABLE_RPATH}" = "x" ]; then ENABLE_RPATH="$default_ENABLE_RPATH"; fi
RPATHLDFLAGS="${LD_RPATH}${LD_RPATH_PRE}${libdir}"
# icu-config version of above 'if':
case "x$ENABLE_RPATH" in
x[yY]*)
ENABLE_RPATH=YES
RPATHLDFLAGS="${LD_RPATH}${LD_RPATH_PRE}${libdir}"
;;
x[nN]*)
ENABLE_RPATH=NO
RPATHLDFLAGS=""
;;
x)
ENABLE_RPATH=NO
RPATHLDFLAGS=""
;;
*)
echo $0: Unknown --enable-rpath value ${ENABLE_RPATH} 1>&2
exit 3
;;
esac
# Name flexibility for the library naming scheme. Any modifications should
# be made in the mh- file for the specific platform.
DATA_STUBNAME="data"
COMMON_STUBNAME="uc"
I18N_STUBNAME="i18n"
LAYOUTEX_STUBNAME="lx"
IO_STUBNAME="io"
TOOLUTIL_STUBNAME="tu"
CTESTFW_STUBNAME="test"
### To link your application with ICU:
# 1. use LDFLAGS, CFLAGS, etc from above
# 2. link with ${ICULIBS}
# 3. optionally, add one or more of:
# - ${ICULIBS_I18N} - i18n library, formatting, etc.
# - ${ICULIBS_ICUIO} - ICU stdio equivalent library
ICULIBS_COMMON="-l${ICUPREFIX}uc${ICULIBSUFFIX}${ICULIBSUFFIX_VERSION}"
ICULIBS_DATA="-l${ICUPREFIX}${DATA_STUBNAME}${ICULIBSUFFIX}${ICULIBSUFFIX_VERSION}"
ICULIBS_I18N="-l${ICUPREFIX}${I18N_STUBNAME}${ICULIBSUFFIX}${ICULIBSUFFIX_VERSION}"
ICULIBS_TOOLUTIL="-l${ICUPREFIX}tu${ICULIBSUFFIX}${ICULIBSUFFIX_VERSION}"
ICULIBS_CTESTFW="-l${ICUPREFIX}ctestfw${ICULIBSUFFIX}${ICULIBSUFFIX_VERSION}"
ICULIBS_ICUIO="-l${ICUPREFIX}io${ICULIBSUFFIX}${ICULIBSUFFIX_VERSION}"
ICULIBS_OBSOLETE="-l${ICUPREFIX}obsolete${ICULIBSUFFIX}${ICULIBSUFFIX_VERSION}"
ICULIBS_LAYOUTEX="-l${ICUPREFIX}lx${ICULIBSUFFIX}${ICULIBSUFFIX_VERSION}"
ICULIBS_BASE="-L${libdir}"
# for icu-config to test with
ICULIBS_COMMON_LIB_NAME="${LIBICU}${COMMON_STUBNAME}${ICULIBSUFFIX}${ICULIBSUFFIX_VERSION}.${SO}"
ICULIBS_COMMON_LIB_NAME_A="${LIBICU}${COMMON_STUBNAME}${ICULIBSUFFIX}.${A}"
# ICULIBS is the set of libraries your application should link
# with usually. Many applications will want to add ${ICULIBS_I18N} as well.
ICULIBS="${ICULIBS_BASE} ${ICULIBS_I18N} ${ICULIBS_COMMON} ${ICULIBS_DATA} "
# Proper echo newline handling is needed in icu-config
ECHO_N="-n"
ECHO_C=""
# Not currently being used but good to have for proper tab handling
ECHO_T=""
##################################################################
#
# *2* access to ICU tools
#
##################################################################
# Environment variable to set a runtime search path
# (Overridden when necessary in -mh files)
LDLIBRARYPATH_ENVVAR="LD_LIBRARY_PATH"
# Versioned target for a shared library
## FINAL_SO_TARGET = ${SO_TARGET}.${SO_TARGET_VERSION}
## MIDDLE_SO_TARGET = ${SO_TARGET}.${SO_TARGET_VERSION_MAJOR}
# Access to important ICU tools.
# Use as follows: ${INVOKE} ${GENRB} arguments ..
INVOKE="${LDLIBRARYPATH_ENVVAR}=${libdir}:$$${LDLIBRARYPATH_ENVVAR} ${LEAK_CHECKER}"
GENCCODE="${sbindir}/genccode"
ICUPKG="${sbindir}/icupkg"
GENCMN="${sbindir}/gencmn"
GENRB="${bindir}/genrb"
PKGDATA="${bindir}/pkgdata"
# moved here because of dependencies
pkgdatadir="${datadir}/${PACKAGE}${ICULIBSUFFIX}/${VERSION}"
pkglibdir="${libdir}/${PACKAGE}${ICULIBSUFFIX}/${VERSION}"
##################################################################
#
# *3* Information about the host
#
##################################################################
# Information about the host that 'configure' was run on.
host="x86_64-redhat-linux-gnu"
host_alias="x86_64-redhat-linux-gnu"
host_cpu="x86_64"
host_vendor="redhat"
host_os="linux-gnu"
# Our platform canonical name (as determined by configure)
# this is a #define value (i.e. U_XXXX or XXXX)
platform="U_LINUX"
##################################################################
#
# *4* compiler flags and misc. options
#
##################################################################
AR="ar"
# initial tab keeps it out of the shell version.
ARFLAGS=" ${ARFLAGS}"
CC="gcc"
CPP="gcc -E"
CFLAGS=""
CPPFLAGS="-I${prefix}/include"
CXXFLAGS="-std=c++11"
CXX="g++"
DEFAULT_MODE="dll"
DEFS="-DPACKAGE_NAME=\"ICU\" -DPACKAGE_TARNAME=\"International\ Components\ for\ Unicode\" -DPACKAGE_VERSION=\"74.2\" -DPACKAGE_STRING=\"ICU\ 74.2\" -DPACKAGE_BUGREPORT=\"http://icu-project.org/bugs\" -DPACKAGE_URL=\"http://icu-project.org\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DSIZEOF_VOID_P=8 -DHAVE_LIBM=1 -DHAVE_ELF_H=1 -DHAVE_DLFCN_H=1 -DHAVE_DLOPEN=1 -DHAVE_GETTIMEOFDAY=1 -DHAVE_LIBPTHREAD=1 -DHAVE_INTTYPES_H=1 -DHAVE_DIRENT_H=1 -DHAVE_WCHAR_H=1 -DSIZEOF_WCHAR_T=4 "
# use a consistent INSTALL
INSTALL="${SHELL} ${pkgdatadir}/install-sh -c"
INSTALL_DATA="${INSTALL} -m 644"
INSTALL_PROGRAM="${INSTALL}"
INSTALL_SCRIPT="${INSTALL}"
LDFLAGS="${RPATHLDFLAGS}"
LIBS="-lpthread -ldl -lm "
LIB_M=""
LIB_VERSION="74.2"
LIB_VERSION_MAJOR="74"
MKINSTALLDIRS="${SHELL} ${pkgdatadir}/mkinstalldirs"
RANLIB="ranlib"
RMV="rm -rf"
SHELL="/bin/sh"
SHLIB_c="${CC} ${DEFS} ${CPPFLAGS} ${CFLAGS} ${LDFLAGS} -shared"
SHLIB_cc="${CXX} ${DEFS} ${CPPFLAGS} ${CXXFLAGS} ${LDFLAGS} -shared"
U_IS_BIG_ENDIAN="0"
includedir="/opt/alt/alt-nodejs18/root/usr/include"
infodir="/opt/alt/alt-nodejs18/root/usr/share/info"
localstatedir="/opt/alt/alt-nodejs18/root/var"
mandir="/opt/alt/alt-nodejs18/root/usr/share/man"
oldincludedir="/usr/include"
program_transform_name="s,x,x,"
sharedstatedir="/opt/alt/alt-nodejs18/root/var/lib"
sysconfdir="/opt/alt/alt-nodejs18/root/etc"
INSTALL_L="${INSTALL_DATA}"
# for derivative builds - don't bother with VERBOSE/NONVERBOSE SILENT_COMPILE
##################################################################
#
# *5* packaging options and directories
#
##################################################################
# The basename of the ICU data file (i.e. icudt21b )
ICUDATA_CHAR="l"
ICUDATA_NAME="icudt74l"
# Defaults for pkgdata's mode and directories
# The default data dir changes depending on what packaging mode
# is being used
if [ "x$PKGDATA_MODE" = "x" ];
then
PKGDATA_MODE="dll"
fi
case "$PKGDATA_MODE" in
common)
ICUDATA_DIR="${pkgdatadir}"
ICUPKGDATA_DIR="${ICUDATA_DIR}"
;;
dll)
ICUDATA_DIR="${pkgdatadir}"
ICUPKGDATA_DIR="${libdir}"
;;
*)
ICUDATA_DIR="${pkgdatadir}"
ICUPKGDATA_DIR="${ICUDATA_DIR}"
;;
esac
GENCCODE_ASSEMBLY="-a gcc"
##################################################################
#
# *6* Inclusion of platform make fragment (mh-* file)
#
##################################################################
# The mh- file ("make fragment") for the platform is included here.
# It may override the above settings.
# It is put last so that the mh-file can override anything.
# The selfcheck is just a sanity check that this makefile is
# parseable. The mh fragment is only included if this does not occur.
# Following from mh-linux
## -*-makefile-*-
## Copyright (C) 2016 and later: Unicode, Inc. and others.
## License & terms of use: http://www.unicode.org/copyright.html
## Linux-specific setup
## Copyright (c) 1999-2013, International Business Machines Corporation and
## others. All Rights Reserved.
## Commands to generate dependency files
GEN_DEPS_c="${CC} -E -MM ${DEFS} ${CPPFLAGS}"
GEN_DEPS_cc="${CXX} -E -MM ${DEFS} ${CPPFLAGS} ${CXXFLAGS}"
## Flags for position independent code
SHAREDLIBCFLAGS="-fPIC"
SHAREDLIBCXXFLAGS="-fPIC"
SHAREDLIBCPPFLAGS="-DPIC"
## Additional flags when building libraries and with threads
THREADSCPPFLAGS="-D_REENTRANT"
LIBCPPFLAGS=""
## Compiler switch to embed a runtime search path
LD_RPATH="-Wl,-zorigin,-rpath,\$\$ORIGIN "
LD_RPATH_PRE="-Wl,-rpath,"
## These are the library specific LDFLAGS
LDFLAGSICUDT="-nodefaultlibs -nostdlib"
## Compiler switch to embed a library name
# The initial tab in the next line is to prevent icu-config from reading it.
# We can't depend on MIDDLE_SO_TARGET being set.
LD_SONAME=
## Shared library options
LD_SOOPTIONS="-Wl,-Bsymbolic"
## Shared object suffix
SO="so"
## Non-shared intermediate object suffix
STATIC_O="ao"
## Compilation rules
## Dependency rules
## Versioned libraries rules
## Bind internal references
# LDflags that pkgdata will use
BIR_LDFLAGS="-Wl,-Bsymbolic"
# Dependencies [i.e. map files] for the final library
BIR_DEPS=""
## Remove shared library 's'
STATIC_PREFIX_WHEN_USED=""
STATIC_PREFIX=""
## End Linux-specific setup
## -*-sh-*-
## BEGIN of icu-config-bottom.
## Copyright (C) 2016 and later: Unicode, Inc. and others.
## License & terms of use: http://www.unicode.org/copyright.html
## Copyright (c) 2002-2013, International Business Machines Corporation and
## others. All Rights Reserved.
# For MinGW do we want the common DLL to go into the bin location?
if [ "$MINGW_MOVEDLLSTOBINDIR" = "YES" ]; then
ICUUC_FILE="${bindir}/${ICULIBS_COMMON_LIB_NAME}"
else
ICUUC_FILE="${libdir}/${ICULIBS_COMMON_LIB_NAME}"
fi
ICUUC_FILE_A="${libdir}/${ICULIBS_COMMON_LIB_NAME_A}"
# echo ENABLE RPATH $ENABLE_RPATH and RPATHLDFLAGS=${RPATH_LDFLAGS}
if [ "x$PKGDATA_MODE" = "x" ]; then
PKGDATA_MODE=dll
fi
}
## The actual code of icu-config goes here.
ME=`basename "$0"`
allflags()
{
echo " --noverify Don't verify that ICU is actually installed."
echo " --bindir Print binary directory path (bin)"
echo " --cc Print C compiler used [CC]"
echo " --cflags Print C compiler flags [CFLAGS]"
echo " --cflags-dynamic Print additional C flags for"
echo " building shared libraries."
echo " --cppflags Print C Preprocessor flags [CPPFLAGS]"
echo " --cppflags-dynamic Print additional C Preprocessor flags for"
echo " building shared libraries."
echo " --cppflags-searchpath Print only -I include directives (-Iinclude)"
echo " --cxx Print C++ compiler used [CXX]"
echo " --cxxflags Print C++ compiler flags [CXXFLAGS]"
echo " --cxxflags-dynamic Print additional C++ flags for"
echo " building shared libraries."
echo " --detect-prefix Attempt to detect prefix based on PATH"
echo " --exec-prefix Print prefix for executables (/bin)"
echo " --exists Return with 0 status if ICU exists else fail"
echo " --help, -?, --usage Print this message"
echo " --icudata Print shortname of ICU data file (icudt21l)"
echo " --icudata-install-dir Print path to install data to - use as --install option to pkgdata(1)"
echo " --icudata-mode Print default ICU pkgdata mode (dll) - use as --mode option to pkgdata(1)."
echo " --icudatadir Print path to packaged archive data. Can set as [ICU_DATA]"
echo " --invoke Print commands to invoke an ICU program"
echo " --invoke=<prog> Print commands to invoke an ICU program named <prog> (ex: genrb)"
echo " --ldflags Print -L search path and -l libraries to link with ICU [LDFLAGS]. This is for the data, uc (common), and i18n libraries only. "
echo " --ldflags-libsonly Same as --ldflags, but only the -l directives"
echo " --ldflags-searchpath Print only -L (search path) directive"
echo " --ldflags-system Print only system libs ICU links with (-lpthread, -lm)"
echo " --ldflags-icuio Print ICU icuio link directive. Use in addition to --ldflags "
echo " --ldflags-obsolete Print ICU obsolete link directive. Use in addition to --ldflags. (requires icuapps/obsolete to be built and installed.) "
echo " --mandir Print manpage (man) path"
echo " --prefix Print PREFIX to icu install (/usr/local)"
echo " --prefix=XXX Set prefix to XXX for remainder of command"
echo " --sbindir Print system binary path (sbin) "
echo " --shared-datadir Print shared data (share) path. This is NOT the ICU data dir."
echo " --shlib-c Print the command to compile and build C shared libraries with ICU"
echo " --shlib-cc Print the command to compile and build C++ shared libraries with ICU"
echo " --sysconfdir Print system config (etc) path"
echo " --unicode-version Print version of Unicode data used in ICU ($UNICODE_VERSION)"
echo " --version Print ICU version ($VERSION)"
echo " --incfile Print path to Makefile.inc"
echo " --incpkgdatafile Print path to pkgdata.inc (for -O option of pkgdata)"
echo " --install Print path to install-sh"
echo " --mkinstalldirs Print path to mkinstalldirs"
}
## Print the normal usage message
shortusage()
{
echo "usage: ${ME} " `allflags | cut -c-25 | sed -e 's%.*%[ & ]%'`
}
usage()
{
echo "${ME}: icu-config: ICU configuration helper script"
echo
echo "The most commonly used options will be --cflags, --cxxflags, --cppflags, and --ldflags."
echo 'Example (in make): CPFLAGS=$(shell icu-config --cppflags)'
echo ' LDFLAGS=$(shell icu-config --ldflags)'
echo " (etc).."
echo
echo "Usage:"
allflags
echo
echo " [Brackets] show MAKE variable equivalents, (parenthesis) show example output"
echo
echo "Copyright (c) 2002-2013, International Business Machines Corporation and others. All Rights Reserved."
echo
echo "NOTE: Please consider using the pkg-config (.pc) files instead of icu-config."
echo " See: <https://unicode-org.github.io/icu/userguide/howtouseicu> "
}
## Check the sanity of current variables
sanity()
{
if [ ! -f "${ICUUC_FILE}" -a ! -f "${ICUUC_FILE_A}" ] && [ ${IGNORE_ICUUC_FILE_CHECK} = "no" ] && [ ${SANITY} = "sane" ];
then
echo "### $ME: Can't find ${ICUUC_FILE} - ICU prefix is wrong." 1>&2
echo "### Try the --prefix= option " 1>&2
echo "### or --detect-prefix" 1>&2
echo "### (If you want to disable this check, use the --noverify option)" 1>&2
echo "### $ME: Exitting." 1>&2
exit 2
fi
}
## Main starts here.
if [ $# -lt 1 ]; then
shortusage
exit 1
fi
# For certain options (e.g. --detect-prefix) don't check for icuuc library file.
IGNORE_ICUUC_FILE_CHECK="no";
SANITY="sane"
case "$1" in
--noverify)
SANITY="nosanity"
shift
;;
esac
case "$1" in
*prefix*)
IGNORE_ICUUC_FILE_CHECK="yes"
;;
esac
# Load our variables from autoconf
# ALWAYS load twice because of dependencies
loaddefs
loaddefs
if [ $# -gt 0 -a $1 = "--selfcheck" ];
then
echo "passed"
exit
# EXIT for self check
fi
sanity
while [ $# -gt 0 ];
do
arg="$1"
var=`echo $arg | sed -e 's/^[^=]*=//'`
# echo "### processing $arg" 1>&2
case "$arg" in
# undocumented.
--debug)
set -x
;;
--noverify)
echo "### $ME: Error: --noverify must be the first argument." 1>&2
exit 1
;;
--so)
echo $SO
;;
--bindir)
echo $bindir
;;
--libdir)
echo $libdir
;;
--exists)
sanity
;;
--sbindir)
echo $sbindir
;;
--mkinstalldirs)
echo ${MKINSTALLDIRS}
;;
--install)
echo ${INSTALL}
;;
--invoke=*)
QUOT="\""
CMD="${var}"
# If it's not a locally executable command (1st choice) then
# search for it in the ICU directories.
if [ ! -x ${CMD} ]; then
if [ -x ${bindir}/${var} ]; then
CMD="${bindir}/${var}"
fi
if [ -x ${sbindir}/${var} ]; then
CMD="${sbindir}/${var}"
fi
fi
echo "env ${QUOT}${LDLIBRARYPATH_ENVVAR}=${libdir}:"'${'"${LDLIBRARYPATH_ENVVAR}"'}'${QUOT} ${CMD}
;;
--invoke)
QUOT="\""
echo "env ${QUOT}${LDLIBRARYPATH_ENVVAR}=${libdir}:"'${'"${LDLIBRARYPATH_ENVVAR}"'}'${QUOT}
;;
--cflags)
echo $ECHO_N "${CFLAGS} ${ECHO_C}"
;;
--cc)
echo $ECHO_N "${CC} ${ECHO_C}"
;;
--cxx)
echo $ECHO_N "${CXX} ${ECHO_C}"
;;
--cxxflags)
echo $ECHO_N "${CXXFLAGS} ${ECHO_C}"
;;
--cppflags)
# Don't echo the -I. - it's unneeded.
echo $ECHO_N "${CPPFLAGS} ${ECHO_C}" | sed -e 's/-I. //'
;;
--cppflags-searchpath)
echo $ECHO_N "-I${prefix}/include ${ECHO_C}"
;;
--cppflags-dynamic)
echo $ECHO_N "${SHAREDLIBCPPFLAGS} ${ECHO_C}"
;;
--cxxflags-dynamic)
echo $ECHO_N "${SHAREDLIBCXXFLAGS} ${ECHO_C}"
;;
--cflags-dynamic)
echo $ECHO_N "${SHAREDLIBCFLAGS} ${ECHO_C}"
;;
--ldflags-system)
echo $ECHO_N "${LIBS} ${ECHO_C}"
;;
--ldflags)
echo $ECHO_N "${LDFLAGS} ${ICULIBS} ${ECHO_C}"
# $RPATH_LDFLAGS
;;
--ldflags-libsonly)
echo $ECHO_N "${ICULIBS_I18N} ${ICULIBS_COMMON} ${ICULIBS_DATA} ${ECHO_C}"
;;
--ldflags-icuio)
echo $ECHO_N " ${ICULIBS_ICUIO} ${ECHO_C}"
;;
--ldflags-obsolete)
echo $ECHO_N "${ICULIBS_OBSOLETE} ${ECHO_C}"
;;
--ldflags-toolutil)
echo $ECHO_N " ${ICULIBS_TOOLUTIL} ${ECHO_C}"
;;
--ldflags-layout)
echo ${ME}: ERROR: the old layout engine has been removed. use HarfBuzz.
exit 1
;;
--ldflags-searchpath)
echo $ECHO_N "-L${libdir} ${ECHO_C}"
;;
--detect-prefix)
HERE=`echo $0 | sed -e "s/$ME//g"`
if [ -f "${HERE}/../lib/${ICULIBS_COMMON_LIB_NAME}" -o -f "${HERE}/../lib/${ICULIBS_COMMON_LIB_NAME_A}" ]; then
prefix="${HERE}/.."
echo "## Using --prefix=${prefix}" 1>&2
fi
loaddefs
loaddefs
;;
--exec-prefix)
echo $exec_prefix
;;
--prefix)
echo $prefix
;;
--prefix=*)
prefix=$var
loaddefs
loaddefs
;;
--sysconfdir)
echo $sysconfdir
;;
--mandir)
echo $mandir
;;
--shared-datadir)
echo $ECHO_N "${datadir} ${ECHO_C}"
;;
--incfile)
echo $ECHO_N "${pkglibdir}/Makefile.inc ${ECHO_C}"
;;
--incpkgdatafile)
echo $ECHO_N "${pkglibdir}/pkgdata.inc ${ECHO_C}"
;;
--icudata)
echo $ECHO_N "${ICUDATA_NAME} ${ECHO_C}"
;;
--icudata-mode)
echo $ECHO_N "${PKGDATA_MODE} ${ECHO_C}"
;;
--icudata-install-dir)
echo $ECHO_N "${ICUPKGDATA_DIR} ${ECHO_C}"
;;
--icudatadir)
echo $ECHO_N "${ICUDATA_DIR} ${ECHO_C}"
;;
--shlib-c)
echo $ECHO_N "${SHLIB_c} ${ECHO_C}"
;;
--shlib-cc)
echo $ECHO_N "${SHLIB_cc} ${ECHO_C}"
;;
--version)
echo $ECHO_N $VERSION
;;
--unicode-version)
echo $ECHO_N $UNICODE_VERSION
;;
--host)
echo $host
exit 0
;;
--help)
usage
exit 0
;;
--usage)
usage
exit 0
;;
# --enable-rpath=*)
# ENABLE_RPATH=$var
# loaddefs
# ;;
-?)
usage
exit 0
;;
*)
echo ${ME}: ERROR Unknown Option $arg 1>&2
echo 1>&2
shortusage 1>&2
echo "### $ME: Exitting." 1>&2
exit 1;
;;
esac
shift
# Reset the ignore icuuc file check flag
if [ $IGNORE_ICUUC_FILE_CHECK = "yes" ]; then
IGNORE_ICUUC_FILE_CHECK="no"
sanity
fi
done
echo
# Check once before we quit (will check last used prefix)
sanity
## END of icu-config-bottom
exit 0