| Dir : /proc/self/root/opt/saltstack/salt/lib/python3.10/site-packages/salt/modules/ |
| Server: Linux ngx353.inmotionhosting.com 4.18.0-553.22.1.lve.1.el8.x86_64 #1 SMP Tue Oct 8 15:52:54 UTC 2024 x86_64 IP: 209.182.202.254 |
| Dir : //proc/self/root/opt/saltstack/salt/lib/python3.10/site-packages/salt/modules/dracr.py |
"""
Manage Dell DRAC.
.. versionadded:: 2015.8.2
"""
import logging
import os
import re
import salt.utils.path
from salt.exceptions import CommandExecutionError
log = logging.getLogger(__name__)
__proxyenabled__ = ["fx2"]
try:
run_all = __salt__["cmd.run_all"]
except (NameError, KeyError):
import salt.modules.cmdmod
__salt__ = {"cmd.run_all": salt.modules.cmdmod.run_all}
def __virtual__():
if salt.utils.path.which("racadm"):
return True
return (
False,
"The drac execution module cannot be loaded: racadm binary not in path.",
)
def __parse_drac(output):
"""
Parse Dell DRAC output
"""
drac = {}
section = ""
for i in output.splitlines():
if i.strip().endswith(":") and "=" not in i:
section = i[0:-1]
drac[section] = {}
if i.rstrip() and "=" in i:
if section in drac:
drac[section].update(dict([[prop.strip() for prop in i.split("=")]]))
else:
section = i.strip()
if section not in drac and section:
drac[section] = {}
return drac
def __execute_cmd(
command, host=None, admin_username=None, admin_password=None, module=None
):
"""
Execute rac commands
"""
if module:
# -a takes 'server' or 'switch' to represent all servers
# or all switches in a chassis. Allow
# user to say 'module=ALL_SERVER' or 'module=ALL_SWITCH'
if module.startswith("ALL_"):
modswitch = "-a " + module[module.index("_") + 1 : len(module)].lower()
else:
modswitch = f"-m {module}"
else:
modswitch = ""
if not host:
# This is a local call
cmd = __salt__["cmd.run_all"](f"racadm {command} {modswitch}")
else:
cmd = __salt__["cmd.run_all"](
"racadm -r {} -u {} -p {} {} {}".format(
host, admin_username, admin_password, command, modswitch
),
output_loglevel="quiet",
)
if cmd["retcode"] != 0:
log.warning("racadm returned an exit code of %s", cmd["retcode"])
return False
return True
def __execute_ret(
command, host=None, admin_username=None, admin_password=None, module=None
):
"""
Execute rac commands
"""
if module:
if module == "ALL":
modswitch = "-a "
else:
modswitch = f"-m {module}"
else:
modswitch = ""
if not host:
# This is a local call
cmd = __salt__["cmd.run_all"](f"racadm {command} {modswitch}")
else:
cmd = __salt__["cmd.run_all"](
"racadm -r {} -u {} -p {} {} {}".format(
host, admin_username, admin_password, command, modswitch
),
output_loglevel="quiet",
)
if cmd["retcode"] != 0:
log.warning("racadm returned an exit code of %s", cmd["retcode"])
else:
fmtlines = []
for l in cmd["stdout"].splitlines():
if l.startswith("Security Alert"):
continue
if l.startswith("RAC1168:"):
break
if l.startswith("RAC1169:"):
break
if l.startswith("Continuing execution"):
continue
if not l.strip():
continue
fmtlines.append(l)
if "=" in l:
continue
cmd["stdout"] = "\n".join(fmtlines)
return cmd
def get_dns_dracname(host=None, admin_username=None, admin_password=None):
ret = __execute_ret(
"get iDRAC.NIC.DNSRacName",
host=host,
admin_username=admin_username,
admin_password=admin_password,
)
parsed = __parse_drac(ret["stdout"])
return parsed
def set_dns_dracname(name, host=None, admin_username=None, admin_password=None):
ret = __execute_ret(
f"set iDRAC.NIC.DNSRacName {name}",
host=host,
admin_username=admin_username,
admin_password=admin_password,
)
return ret
def system_info(host=None, admin_username=None, admin_password=None, module=None):
"""
Return System information
CLI Example:
.. code-block:: bash
salt dell dracr.system_info
"""
cmd = __execute_ret(
"getsysinfo",
host=host,
admin_username=admin_username,
admin_password=admin_password,
module=module,
)
if cmd["retcode"] != 0:
log.warning("racadm returned an exit code of %s", cmd["retcode"])
return cmd
return __parse_drac(cmd["stdout"])
def set_niccfg(
ip=None,
netmask=None,
gateway=None,
dhcp=False,
host=None,
admin_username=None,
admin_password=None,
module=None,
):
cmdstr = "setniccfg "
if dhcp:
cmdstr += "-d "
else:
cmdstr += "-s " + ip + " " + netmask + " " + gateway
return __execute_cmd(
cmdstr,
host=host,
admin_username=admin_username,
admin_password=admin_password,
module=module,
)
def set_nicvlan(
vlan=None, host=None, admin_username=None, admin_password=None, module=None
):
cmdstr = "setniccfg -v "
if vlan:
cmdstr += vlan
ret = __execute_cmd(
cmdstr,
host=host,
admin_username=admin_username,
admin_password=admin_password,
module=module,
)
return ret
def network_info(host=None, admin_username=None, admin_password=None, module=None):
"""
Return Network Configuration
CLI Example:
.. code-block:: bash
salt dell dracr.network_info
"""
inv = inventory(
host=host, admin_username=admin_username, admin_password=admin_password
)
if inv is None:
cmd = {}
cmd["retcode"] = -1
cmd["stdout"] = "Problem getting switch inventory"
return cmd
if module not in inv.get("switch") and module not in inv.get("server"):
cmd = {}
cmd["retcode"] = -1
cmd["stdout"] = f"No module {module} found."
return cmd
cmd = __execute_ret(
"getniccfg",
host=host,
admin_username=admin_username,
admin_password=admin_password,
module=module,
)
if cmd["retcode"] != 0:
log.warning("racadm returned an exit code of %s", cmd["retcode"])
cmd["stdout"] = "Network:\n" + "Device = " + module + "\n" + cmd["stdout"]
return __parse_drac(cmd["stdout"])
def nameservers(ns, host=None, admin_username=None, admin_password=None, module=None):
"""
Configure the nameservers on the DRAC
CLI Example:
.. code-block:: bash
salt dell dracr.nameservers [NAMESERVERS]
salt dell dracr.nameservers ns1.example.com ns2.example.com
admin_username=root admin_password=calvin module=server-1
host=192.168.1.1
"""
if len(ns) > 2:
log.warning("racadm only supports two nameservers")
return False
for i in range(1, len(ns) + 1):
if not __execute_cmd(
f"config -g cfgLanNetworking -o cfgDNSServer{i} {ns[i - 1]}",
host=host,
admin_username=admin_username,
admin_password=admin_password,
module=module,
):
return False
return True
def syslog(
server,
enable=True,
host=None,
admin_username=None,
admin_password=None,
module=None,
):
"""
Configure syslog remote logging, by default syslog will automatically be
enabled if a server is specified. However, if you want to disable syslog
you will need to specify a server followed by False
CLI Example:
.. code-block:: bash
salt dell dracr.syslog [SYSLOG IP] [ENABLE/DISABLE]
salt dell dracr.syslog 0.0.0.0 False
"""
if enable and __execute_cmd(
"config -g cfgRemoteHosts -o cfgRhostsSyslogEnable 1",
host=host,
admin_username=admin_username,
admin_password=admin_password,
module=None,
):
return __execute_cmd(
f"config -g cfgRemoteHosts -o cfgRhostsSyslogServer1 {server}",
host=host,
admin_username=admin_username,
admin_password=admin_password,
module=module,
)
return __execute_cmd(
"config -g cfgRemoteHosts -o cfgRhostsSyslogEnable 0",
host=host,
admin_username=admin_username,
admin_password=admin_password,
module=module,
)
def email_alerts(action, host=None, admin_username=None, admin_password=None):
"""
Enable/Disable email alerts
CLI Example:
.. code-block:: bash
salt dell dracr.email_alerts True
salt dell dracr.email_alerts False
"""
if action:
return __execute_cmd(
"config -g cfgEmailAlert -o cfgEmailAlertEnable -i 1 1",
host=host,
admin_username=admin_username,
admin_password=admin_password,
)
else:
return __execute_cmd("config -g cfgEmailAlert -o cfgEmailAlertEnable -i 1 0")
def list_users(host=None, admin_username=None, admin_password=None, module=None):
"""
List all DRAC users
CLI Example:
.. code-block:: bash
salt dell dracr.list_users
"""
users = {}
_username = ""
for idx in range(1, 17):
cmd = __execute_ret(
f"getconfig -g cfgUserAdmin -i {idx}",
host=host,
admin_username=admin_username,
admin_password=admin_password,
)
if cmd["retcode"] != 0:
log.warning("racadm returned an exit code of %s", cmd["retcode"])
for user in cmd["stdout"].splitlines():
if not user.startswith("cfg"):
continue
(key, val) = user.split("=")
if key.startswith("cfgUserAdminUserName"):
_username = val.strip()
if val:
users[_username] = {"index": idx}
else:
break
else:
if _username:
users[_username].update({key: val})
return users
def delete_user(
username, uid=None, host=None, admin_username=None, admin_password=None
):
"""
Delete a user
CLI Example:
.. code-block:: bash
salt dell dracr.delete_user [USERNAME] [UID - optional]
salt dell dracr.delete_user diana 4
"""
if uid is None:
user = list_users()
uid = user[username]["index"]
if uid:
return __execute_cmd(
f"config -g cfgUserAdmin -o cfgUserAdminUserName -i {uid} ",
host=host,
admin_username=admin_username,
admin_password=admin_password,
)
else:
log.warning("User '%s' does not exist", username)
return False
def change_password(
username,
password,
uid=None,
host=None,
admin_username=None,
admin_password=None,
module=None,
):
"""
Change user's password
CLI Example:
.. code-block:: bash
salt dell dracr.change_password [USERNAME] [PASSWORD] uid=[OPTIONAL]
host=<remote DRAC> admin_username=<DRAC user>
admin_password=<DRAC PW>
salt dell dracr.change_password diana secret
Note that if only a username is specified then this module will look up
details for all 16 possible DRAC users. This is time consuming, but might
be necessary if one is not sure which user slot contains the one you want.
Many late-model Dell chassis have 'root' as UID 1, so if you can depend
on that then setting the password is much quicker.
Raises an error if the supplied password is greater than 20 chars.
"""
if len(password) > 20:
raise CommandExecutionError("Supplied password should be 20 characters or less")
if uid is None:
user = list_users(
host=host,
admin_username=admin_username,
admin_password=admin_password,
module=module,
)
uid = user[username]["index"]
if uid:
return __execute_cmd(
"config -g cfgUserAdmin -o cfgUserAdminPassword -i {} {}".format(
uid, password
),
host=host,
admin_username=admin_username,
admin_password=admin_password,
module=module,
)
else:
log.warning("racadm: user '%s' does not exist", username)
return False
def deploy_password(
username, password, host=None, admin_username=None, admin_password=None, module=None
):
"""
Change the QuickDeploy password, used for switches as well
CLI Example:
.. code-block:: bash
salt dell dracr.deploy_password [USERNAME] [PASSWORD]
host=<remote DRAC> admin_username=<DRAC user>
admin_password=<DRAC PW>
salt dell dracr.change_password diana secret
Note that if only a username is specified then this module will look up
details for all 16 possible DRAC users. This is time consuming, but might
be necessary if one is not sure which user slot contains the one you want.
Many late-model Dell chassis have 'root' as UID 1, so if you can depend
on that then setting the password is much quicker.
"""
return __execute_cmd(
f"deploy -u {username} -p {password}",
host=host,
admin_username=admin_username,
admin_password=admin_password,
module=module,
)
def deploy_snmp(snmp, host=None, admin_username=None, admin_password=None, module=None):
"""
Change the QuickDeploy SNMP community string, used for switches as well
CLI Example:
.. code-block:: bash
salt dell dracr.deploy_snmp SNMP_STRING
host=<remote DRAC or CMC> admin_username=<DRAC user>
admin_password=<DRAC PW>
salt dell dracr.deploy_password diana secret
"""
return __execute_cmd(
f"deploy -v SNMPv2 {snmp} ro",
host=host,
admin_username=admin_username,
admin_password=admin_password,
module=module,
)
def create_user(
username,
password,
permissions,
users=None,
host=None,
admin_username=None,
admin_password=None,
):
"""
Create user accounts
CLI Example:
.. code-block:: bash
salt dell dracr.create_user [USERNAME] [PASSWORD] [PRIVILEGES]
salt dell dracr.create_user diana secret login,test_alerts,clear_logs
DRAC Privileges
* login : Login to iDRAC
* drac : Configure iDRAC
* user_management : Configure Users
* clear_logs : Clear Logs
* server_control_commands : Execute Server Control Commands
* console_redirection : Access Console Redirection
* virtual_media : Access Virtual Media
* test_alerts : Test Alerts
* debug_commands : Execute Debug Commands
"""
_uids = set()
if users is None:
users = list_users()
if username in users:
log.warning("racadm: user '%s' already exists", username)
return False
for idx in users.keys():
_uids.add(users[idx]["index"])
uid = sorted(list(set(range(2, 12)) - _uids), reverse=True).pop()
# Create user account first
if not __execute_cmd(
f"config -g cfgUserAdmin -o cfgUserAdminUserName -i {uid} {username}",
host=host,
admin_username=admin_username,
admin_password=admin_password,
):
delete_user(username, uid)
return False
# Configure users permissions
if not set_permissions(username, permissions, uid):
log.warning("unable to set user permissions")
delete_user(username, uid)
return False
# Configure users password
if not change_password(username, password, uid):
log.warning("unable to set user password")
delete_user(username, uid)
return False
# Enable users admin
if not __execute_cmd(f"config -g cfgUserAdmin -o cfgUserAdminEnable -i {uid} 1"):
delete_user(username, uid)
return False
return True
def set_permissions(
username, permissions, uid=None, host=None, admin_username=None, admin_password=None
):
"""
Configure users permissions
CLI Example:
.. code-block:: bash
salt dell dracr.set_permissions [USERNAME] [PRIVILEGES]
[USER INDEX - optional]
salt dell dracr.set_permissions diana login,test_alerts,clear_logs 4
DRAC Privileges
* login : Login to iDRAC
* drac : Configure iDRAC
* user_management : Configure Users
* clear_logs : Clear Logs
* server_control_commands : Execute Server Control Commands
* console_redirection : Access Console Redirection
* virtual_media : Access Virtual Media
* test_alerts : Test Alerts
* debug_commands : Execute Debug Commands
"""
privileges = {
"login": "0x0000001",
"drac": "0x0000002",
"user_management": "0x0000004",
"clear_logs": "0x0000008",
"server_control_commands": "0x0000010",
"console_redirection": "0x0000020",
"virtual_media": "0x0000040",
"test_alerts": "0x0000080",
"debug_commands": "0x0000100",
}
permission = 0
# When users don't provide a user ID we need to search for this
if uid is None:
user = list_users()
uid = user[username]["index"]
# Generate privilege bit mask
for i in permissions.split(","):
perm = i.strip()
if perm in privileges:
permission += int(privileges[perm], 16)
return __execute_cmd(
"config -g cfgUserAdmin -o cfgUserAdminPrivilege -i {} 0x{:08X}".format(
uid, permission
),
host=host,
admin_username=admin_username,
admin_password=admin_password,
)
def set_snmp(community, host=None, admin_username=None, admin_password=None):
"""
Configure CMC or individual iDRAC SNMP community string.
Use ``deploy_snmp`` for configuring chassis switch SNMP.
CLI Example:
.. code-block:: bash
salt dell dracr.set_snmp [COMMUNITY]
salt dell dracr.set_snmp public
"""
return __execute_cmd(
f"config -g cfgOobSnmp -o cfgOobSnmpAgentCommunity {community}",
host=host,
admin_username=admin_username,
admin_password=admin_password,
)
def set_network(
ip, netmask, gateway, host=None, admin_username=None, admin_password=None
):
"""
Configure Network on the CMC or individual iDRAC.
Use ``set_niccfg`` for blade and switch addresses.
CLI Example:
.. code-block:: bash
salt dell dracr.set_network [DRAC IP] [NETMASK] [GATEWAY]
salt dell dracr.set_network 192.168.0.2 255.255.255.0 192.168.0.1
admin_username=root admin_password=calvin host=192.168.1.1
"""
return __execute_cmd(
"setniccfg -s {} {} {}".format(
ip,
netmask,
gateway,
host=host,
admin_username=admin_username,
admin_password=admin_password,
)
)
def server_power(
status, host=None, admin_username=None, admin_password=None, module=None
):
"""
status
One of 'powerup', 'powerdown', 'powercycle', 'hardreset',
'graceshutdown'
host
The chassis host.
admin_username
The username used to access the chassis.
admin_password
The password used to access the chassis.
module
The element to reboot on the chassis such as a blade. If not provided,
the chassis will be rebooted.
CLI Example:
.. code-block:: bash
salt dell dracr.server_reboot
salt dell dracr.server_reboot module=server-1
"""
return __execute_cmd(
f"serveraction {status}",
host=host,
admin_username=admin_username,
admin_password=admin_password,
module=module,
)
def server_reboot(host=None, admin_username=None, admin_password=None, module=None):
"""
Issues a power-cycle operation on the managed server. This action is
similar to pressing the power button on the system's front panel to
power down and then power up the system.
host
The chassis host.
admin_username
The username used to access the chassis.
admin_password
The password used to access the chassis.
module
The element to reboot on the chassis such as a blade. If not provided,
the chassis will be rebooted.
CLI Example:
.. code-block:: bash
salt dell dracr.server_reboot
salt dell dracr.server_reboot module=server-1
"""
return __execute_cmd(
"serveraction powercycle",
host=host,
admin_username=admin_username,
admin_password=admin_password,
module=module,
)
def server_poweroff(host=None, admin_username=None, admin_password=None, module=None):
"""
Powers down the managed server.
host
The chassis host.
admin_username
The username used to access the chassis.
admin_password
The password used to access the chassis.
module
The element to power off on the chassis such as a blade.
If not provided, the chassis will be powered off.
CLI Example:
.. code-block:: bash
salt dell dracr.server_poweroff
salt dell dracr.server_poweroff module=server-1
"""
return __execute_cmd(
"serveraction powerdown",
host=host,
admin_username=admin_username,
admin_password=admin_password,
module=module,
)
def server_poweron(host=None, admin_username=None, admin_password=None, module=None):
"""
Powers up the managed server.
host
The chassis host.
admin_username
The username used to access the chassis.
admin_password
The password used to access the chassis.
module
The element to power on located on the chassis such as a blade. If
not provided, the chassis will be powered on.
CLI Example:
.. code-block:: bash
salt dell dracr.server_poweron
salt dell dracr.server_poweron module=server-1
"""
return __execute_cmd(
"serveraction powerup",
host=host,
admin_username=admin_username,
admin_password=admin_password,
module=module,
)
def server_hardreset(host=None, admin_username=None, admin_password=None, module=None):
"""
Performs a reset (reboot) operation on the managed server.
host
The chassis host.
admin_username
The username used to access the chassis.
admin_password
The password used to access the chassis.
module
The element to hard reset on the chassis such as a blade. If
not provided, the chassis will be reset.
CLI Example:
.. code-block:: bash
salt dell dracr.server_hardreset
salt dell dracr.server_hardreset module=server-1
"""
return __execute_cmd(
"serveraction hardreset",
host=host,
admin_username=admin_username,
admin_password=admin_password,
module=module,
)
def server_powerstatus(
host=None, admin_username=None, admin_password=None, module=None
):
"""
return the power status for the passed module
CLI Example:
.. code-block:: bash
salt dell drac.server_powerstatus
"""
ret = __execute_ret(
"serveraction powerstatus",
host=host,
admin_username=admin_username,
admin_password=admin_password,
module=module,
)
result = {"retcode": 0}
if ret["stdout"] == "ON":
result["status"] = True
result["comment"] = "Power is on"
if ret["stdout"] == "OFF":
result["status"] = False
result["comment"] = "Power is on"
if ret["stdout"].startswith("ERROR"):
result["status"] = False
result["comment"] = ret["stdout"]
return result
def server_pxe(host=None, admin_username=None, admin_password=None):
"""
Configure server to PXE perform a one off PXE boot
CLI Example:
.. code-block:: bash
salt dell dracr.server_pxe
"""
if __execute_cmd(
"config -g cfgServerInfo -o cfgServerFirstBootDevice PXE",
host=host,
admin_username=admin_username,
admin_password=admin_password,
):
if __execute_cmd(
"config -g cfgServerInfo -o cfgServerBootOnce 1",
host=host,
admin_username=admin_username,
admin_password=admin_password,
):
return server_reboot
else:
log.warning("failed to set boot order")
return False
log.warning("failed to configure PXE boot")
return False
def list_slotnames(host=None, admin_username=None, admin_password=None):
"""
List the names of all slots in the chassis.
host
The chassis host.
admin_username
The username used to access the chassis.
admin_password
The password used to access the chassis.
CLI Example:
.. code-block:: bash
salt-call --local dracr.list_slotnames host=111.222.333.444
admin_username=root admin_password=secret
"""
slotraw = __execute_ret(
"getslotname",
host=host,
admin_username=admin_username,
admin_password=admin_password,
)
if slotraw["retcode"] != 0:
return slotraw
slots = {}
stripheader = True
for l in slotraw["stdout"].splitlines():
if l.startswith("<"):
stripheader = False
continue
if stripheader:
continue
fields = l.split()
slots[fields[0]] = {}
slots[fields[0]]["slot"] = fields[0]
if len(fields) > 1:
slots[fields[0]]["slotname"] = fields[1]
else:
slots[fields[0]]["slotname"] = ""
if len(fields) > 2:
slots[fields[0]]["hostname"] = fields[2]
else:
slots[fields[0]]["hostname"] = ""
return slots
def get_slotname(slot, host=None, admin_username=None, admin_password=None):
"""
Get the name of a slot number in the chassis.
slot
The number of the slot for which to obtain the name.
host
The chassis host.
admin_username
The username used to access the chassis.
admin_password
The password used to access the chassis.
CLI Example:
.. code-block:: bash
salt-call --local dracr.get_slotname 0 host=111.222.333.444
admin_username=root admin_password=secret
"""
slots = list_slotnames(
host=host, admin_username=admin_username, admin_password=admin_password
)
# The keys for this dictionary are strings, not integers, so convert the
# argument to a string
slot = str(slot)
return slots[slot]["slotname"]
def set_slotname(slot, name, host=None, admin_username=None, admin_password=None):
"""
Set the name of a slot in a chassis.
slot
The slot number to change.
name
The name to set. Can only be 15 characters long.
host
The chassis host.
admin_username
The username used to access the chassis.
admin_password
The password used to access the chassis.
CLI Example:
.. code-block:: bash
salt '*' dracr.set_slotname 2 my-slotname host=111.222.333.444
admin_username=root admin_password=secret
"""
return __execute_cmd(
f"config -g cfgServerInfo -o cfgServerName -i {slot} {name}",
host=host,
admin_username=admin_username,
admin_password=admin_password,
)
def set_chassis_name(name, host=None, admin_username=None, admin_password=None):
"""
Set the name of the chassis.
name
The name to be set on the chassis.
host
The chassis host.
admin_username
The username used to access the chassis.
admin_password
The password used to access the chassis.
CLI Example:
.. code-block:: bash
salt '*' dracr.set_chassis_name my-chassis host=111.222.333.444
admin_username=root admin_password=secret
"""
return __execute_cmd(
f"setsysinfo -c chassisname {name}",
host=host,
admin_username=admin_username,
admin_password=admin_password,
)
def get_chassis_name(host=None, admin_username=None, admin_password=None):
"""
Get the name of a chassis.
host
The chassis host.
admin_username
The username used to access the chassis.
admin_password
The password used to access the chassis.
CLI Example:
.. code-block:: bash
salt '*' dracr.get_chassis_name host=111.222.333.444
admin_username=root admin_password=secret
"""
return bare_rac_cmd(
"getchassisname",
host=host,
admin_username=admin_username,
admin_password=admin_password,
)
def inventory(host=None, admin_username=None, admin_password=None):
def mapit(x, y):
return {x: y}
fields = {}
fields["server"] = ["name", "idrac_version", "blade_type", "gen", "updateable"]
fields["switch"] = ["name", "model_name", "hw_version", "fw_version"]
fields["cmc"] = ["name", "cmc_version", "updateable"]
fields["chassis"] = ["name", "fw_version", "fqdd"]
rawinv = __execute_ret(
"getversion",
host=host,
admin_username=admin_username,
admin_password=admin_password,
)
if rawinv["retcode"] != 0:
return rawinv
in_server = False
in_switch = False
in_cmc = False
in_chassis = False
ret = {}
ret["server"] = {}
ret["switch"] = {}
ret["cmc"] = {}
ret["chassis"] = {}
for l in rawinv["stdout"].splitlines():
if l.startswith("<Server>"):
in_server = True
in_switch = False
in_cmc = False
in_chassis = False
continue
if l.startswith("<Switch>"):
in_server = False
in_switch = True
in_cmc = False
in_chassis = False
continue
if l.startswith("<CMC>"):
in_server = False
in_switch = False
in_cmc = True
in_chassis = False
continue
if l.startswith("<Chassis Infrastructure>"):
in_server = False
in_switch = False
in_cmc = False
in_chassis = True
continue
if not l:
continue
line = re.split(" +", l.strip())
if in_server:
ret["server"][line[0]] = {
k: v for d in map(mapit, fields["server"], line) for (k, v) in d.items()
}
if in_switch:
ret["switch"][line[0]] = {
k: v for d in map(mapit, fields["switch"], line) for (k, v) in d.items()
}
if in_cmc:
ret["cmc"][line[0]] = {
k: v for d in map(mapit, fields["cmc"], line) for (k, v) in d.items()
}
if in_chassis:
ret["chassis"][line[0]] = {
k: v for d in map(mapit, fields["chassis"], line) for k, v in d.items()
}
return ret
def set_chassis_location(location, host=None, admin_username=None, admin_password=None):
"""
Set the location of the chassis.
location
The name of the location to be set on the chassis.
host
The chassis host.
admin_username
The username used to access the chassis.
admin_password
The password used to access the chassis.
CLI Example:
.. code-block:: bash
salt '*' dracr.set_chassis_location location-name host=111.222.333.444
admin_username=root admin_password=secret
"""
return __execute_cmd(
f"setsysinfo -c chassislocation {location}",
host=host,
admin_username=admin_username,
admin_password=admin_password,
)
def get_chassis_location(host=None, admin_username=None, admin_password=None):
"""
Get the location of the chassis.
host
The chassis host.
admin_username
The username used to access the chassis.
admin_password
The password used to access the chassis.
CLI Example:
.. code-block:: bash
salt '*' dracr.set_chassis_location host=111.222.333.444
admin_username=root admin_password=secret
"""
return system_info(
host=host, admin_username=admin_username, admin_password=admin_password
)["Chassis Information"]["Chassis Location"]
def set_chassis_datacenter(
location, host=None, admin_username=None, admin_password=None
):
"""
Set the location of the chassis.
location
The name of the datacenter to be set on the chassis.
host
The chassis host.
admin_username
The username used to access the chassis.
admin_password
The password used to access the chassis.
CLI Example:
.. code-block:: bash
salt '*' dracr.set_chassis_datacenter datacenter-name host=111.222.333.444
admin_username=root admin_password=secret
"""
return set_general(
"cfgLocation",
"cfgLocationDatacenter",
location,
host=host,
admin_username=admin_username,
admin_password=admin_password,
)
def get_chassis_datacenter(host=None, admin_username=None, admin_password=None):
"""
Get the datacenter of the chassis.
host
The chassis host.
admin_username
The username used to access the chassis.
admin_password
The password used to access the chassis.
CLI Example:
.. code-block:: bash
salt '*' dracr.set_chassis_location host=111.222.333.444
admin_username=root admin_password=secret
"""
return get_general(
"cfgLocation",
"cfgLocationDatacenter",
host=host,
admin_username=admin_username,
admin_password=admin_password,
)
def set_general(
cfg_sec, cfg_var, val, host=None, admin_username=None, admin_password=None
):
return __execute_cmd(
f"config -g {cfg_sec} -o {cfg_var} {val}",
host=host,
admin_username=admin_username,
admin_password=admin_password,
)
def get_general(cfg_sec, cfg_var, host=None, admin_username=None, admin_password=None):
ret = __execute_ret(
f"getconfig -g {cfg_sec} -o {cfg_var}",
host=host,
admin_username=admin_username,
admin_password=admin_password,
)
if ret["retcode"] == 0:
return ret["stdout"]
else:
return ret
def idrac_general(
blade_name,
command,
idrac_password=None,
host=None,
admin_username=None,
admin_password=None,
):
"""
Run a generic racadm command against a particular
blade in a chassis. Blades are usually named things like
'server-1', 'server-2', etc. If the iDRAC has a different
password than the CMC, then you can pass it with the
idrac_password kwarg.
:param blade_name: Name of the blade to run the command on
:param command: Command like to pass to racadm
:param idrac_password: Password for the iDRAC if different from the CMC
:param host: Chassis hostname
:param admin_username: CMC username
:param admin_password: CMC password
:return: stdout if the retcode is 0, otherwise a standard cmd.run_all dictionary
CLI Example:
.. code-block:: bash
salt fx2 chassis.cmd idrac_general server-1 'get BIOS.SysProfileSettings'
"""
module_network = network_info(host, admin_username, admin_password, blade_name)
if idrac_password is not None:
password = idrac_password
else:
password = admin_password
idrac_ip = module_network["Network"]["IP Address"]
ret = __execute_ret(
command, host=idrac_ip, admin_username="root", admin_password=password
)
if ret["retcode"] == 0:
return ret["stdout"]
else:
return ret
def _update_firmware(cmd, host=None, admin_username=None, admin_password=None):
if not admin_username:
admin_username = __pillar__["proxy"]["admin_username"]
if not admin_username:
admin_password = __pillar__["proxy"]["admin_password"]
ret = __execute_ret(
cmd, host=host, admin_username=admin_username, admin_password=admin_password
)
if ret["retcode"] == 0:
return ret["stdout"]
else:
return ret
def bare_rac_cmd(cmd, host=None, admin_username=None, admin_password=None):
ret = __execute_ret(
f"{cmd}",
host=host,
admin_username=admin_username,
admin_password=admin_password,
)
if ret["retcode"] == 0:
return ret["stdout"]
else:
return ret
def update_firmware(filename, host=None, admin_username=None, admin_password=None):
"""
Updates firmware using local firmware file
.. code-block:: bash
salt dell dracr.update_firmware firmware.exe
This executes the following command on your FX2
(using username and password stored in the pillar data)
.. code-block:: bash
racadm update –f firmware.exe -u user –p pass
"""
if os.path.exists(filename):
return _update_firmware(
f"update -f {filename}",
host=None,
admin_username=None,
admin_password=None,
)
else:
raise CommandExecutionError(f"Unable to find firmware file {filename}")
def update_firmware_nfs_or_cifs(
filename, share, host=None, admin_username=None, admin_password=None
):
"""
Executes the following for CIFS
(using username and password stored in the pillar data)
.. code-block:: bash
racadm update -f <updatefile> -u user –p pass -l //IP-Address/share
Or for NFS
(using username and password stored in the pillar data)
.. code-block:: bash
racadm update -f <updatefile> -u user –p pass -l IP-address:/share
Salt command for CIFS:
.. code-block:: bash
salt dell dracr.update_firmware_nfs_or_cifs \
firmware.exe //IP-Address/share
Salt command for NFS:
.. code-block:: bash
salt dell dracr.update_firmware_nfs_or_cifs \
firmware.exe IP-address:/share
"""
if os.path.exists(filename):
return _update_firmware(
f"update -f {filename} -l {share}",
host=None,
admin_username=None,
admin_password=None,
)
else:
raise CommandExecutionError(f"Unable to find firmware file {filename}")
# def get_idrac_nic()