| Dir : /proc/self/root/opt/saltstack/salt/lib/python3.10/site-packages/salt/pillar/ |
| Server: Linux ngx353.inmotionhosting.com 4.18.0-553.22.1.lve.1.el8.x86_64 #1 SMP Tue Oct 8 15:52:54 UTC 2024 x86_64 IP: 209.182.202.254 |
| Dir : //proc/self/root/opt/saltstack/salt/lib/python3.10/site-packages/salt/pillar/s3.py |
"""
Copy pillar data from a bucket in Amazon S3
The S3 pillar can be configured in the master config file with the following
options
.. code-block:: yaml
ext_pillar:
- s3:
bucket: my.fancy.pillar.bucket
keyid: KASKFJWAKJASJKDAJKSD
key: ksladfDLKDALSFKSD93q032sdDasdfasdflsadkf
multiple_env: False
environment: base
prefix: somewhere/overthere
verify_ssl: True
service_url: s3.amazonaws.com
kms_keyid: 01234567-89ab-cdef-0123-4567890abcde
s3_cache_expire: 30
s3_sync_on_update: True
path_style: False
https_enable: True
The ``bucket`` parameter specifies the target S3 bucket. It is required.
The ``keyid`` parameter specifies the key id to use when access the S3 bucket.
If it is not provided, an attempt to fetch it from EC2 instance meta-data will
be made.
The ``key`` parameter specifies the key to use when access the S3 bucket. If it
is not provided, an attempt to fetch it from EC2 instance meta-data will be made.
The ``multiple_env`` defaults to False. It specifies whether the pillar should
interpret top level folders as pillar environments (see mode section below).
The ``environment`` defaults to 'base'. It specifies which environment the
bucket represents when in single environments mode (see mode section below). It
is ignored if multiple_env is True.
The ``prefix`` defaults to ''. It specifies a key prefix to use when searching
for data in the bucket for the pillar. It works when multiple_env is True or False.
Essentially it tells ext_pillar to look for your pillar data in a 'subdirectory'
of your S3 bucket
The ``verify_ssl`` parameter defaults to True. It specifies whether to check for
valid S3 SSL certificates. *NOTE* If you use bucket names with periods, this
must be set to False else an invalid certificate error will be thrown (issue
#12200).
The ``service_url`` parameter defaults to 's3.amazonaws.com'. It specifies the
base url to use for accessing S3.
The ``kms_keyid`` parameter is optional. It specifies the ID of the Key
Management Service (KMS) master key that was used to encrypt the object.
The ``s3_cache_expire`` parameter defaults to 30s. It specifies expiration
time of S3 metadata cache file.
The ``s3_sync_on_update`` parameter defaults to True. It specifies if cache
is synced on update rather than jit.
The ``path_style`` parameter defaults to False. It specifies whether to use
path style requests or dns style requests
The ``https_enable`` parameter defaults to True. It specifies whether to use
https protocol or http protocol
This pillar can operate in two modes, single environment per bucket or multiple
environments per bucket.
Single environment mode must have this bucket structure:
.. code-block:: text
s3://<bucket name>/<prefix>/<files>
Multiple environment mode must have this bucket structure:
.. code-block:: text
s3://<bucket name>/<prefix>/<environment>/<files>
If you wish to define your pillar data entirely within S3 it's recommended
that you use the `prefix=` parameter and specify one entry in ext_pillar
for each environment rather than specifying multiple_env. This is due
to issue #22471 (https://github.com/saltstack/salt/issues/22471)
"""
import logging
import os
import pickle
import time
import urllib.parse
from copy import deepcopy
import salt.utils.files
import salt.utils.hashutils
from salt.pillar import Pillar
log = logging.getLogger(__name__)
class S3Credentials:
def __init__(
self,
key,
keyid,
bucket,
service_url,
verify_ssl=True,
kms_keyid=None,
location=None,
path_style=False,
https_enable=True,
):
self.key = key
self.keyid = keyid
self.kms_keyid = kms_keyid
self.bucket = bucket
self.service_url = service_url
self.verify_ssl = verify_ssl
self.location = location
self.path_style = path_style
self.https_enable = https_enable
def ext_pillar(
minion_id,
pillar, # pylint: disable=W0613
bucket,
key=None,
keyid=None,
verify_ssl=True,
location=None,
multiple_env=False,
environment="base",
prefix="",
service_url=None,
kms_keyid=None,
s3_cache_expire=30, # cache for 30 seconds
s3_sync_on_update=True, # sync cache on update rather than jit
path_style=False,
https_enable=True,
):
"""
Execute a command and read the output as YAML
"""
s3_creds = S3Credentials(
key,
keyid,
bucket,
service_url,
verify_ssl,
kms_keyid,
location,
path_style,
https_enable,
)
# normpath is needed to remove appended '/' if root is empty string.
pillar_dir = os.path.normpath(os.path.join(_get_cache_dir(), environment, bucket))
if prefix:
pillar_dir = os.path.normpath(os.path.join(pillar_dir, prefix))
if __opts__["pillar_roots"].get(environment, []) == [pillar_dir]:
return {}
metadata = _init(
s3_creds, bucket, multiple_env, environment, prefix, s3_cache_expire
)
if s3_sync_on_update:
# sync the buckets to the local cache
log.info("Syncing local pillar cache from S3...")
for saltenv, env_meta in metadata.items():
for bucket, files in _find_files(env_meta).items():
for file_path in files:
cached_file_path = _get_cached_file_name(bucket, saltenv, file_path)
log.info("%s - %s : %s", bucket, saltenv, file_path)
# load the file from S3 if not in the cache or too old
_get_file_from_s3(
s3_creds, metadata, saltenv, bucket, file_path, cached_file_path
)
log.info("Sync local pillar cache from S3 completed.")
opts = deepcopy(__opts__)
opts["pillar_roots"][environment] = (
[os.path.join(pillar_dir, environment)] if multiple_env else [pillar_dir]
)
# Avoid recursively re-adding this same pillar
opts["ext_pillar"] = [x for x in opts["ext_pillar"] if "s3" not in x]
pil = Pillar(opts, __grains__, minion_id, environment)
compiled_pillar = pil.compile_pillar(ext=False)
return compiled_pillar
def _init(creds, bucket, multiple_env, environment, prefix, s3_cache_expire):
"""
Connect to S3 and download the metadata for each file in all buckets
specified and cache the data to disk.
"""
cache_file = _get_buckets_cache_filename(bucket, prefix)
exp = time.time() - s3_cache_expire
# check if cache_file exists and its mtime
if os.path.isfile(cache_file):
cache_file_mtime = os.path.getmtime(cache_file)
else:
# file does not exists then set mtime to 0 (aka epoch)
cache_file_mtime = 0
expired = cache_file_mtime <= exp
log.debug(
"S3 bucket cache file %s is %sexpired, mtime_diff=%ss, expiration=%ss",
cache_file,
"" if expired else "not ",
cache_file_mtime - exp,
s3_cache_expire,
)
if expired:
pillars = _refresh_buckets_cache_file(
creds, cache_file, multiple_env, environment, prefix
)
else:
pillars = _read_buckets_cache_file(cache_file)
log.debug("S3 bucket retrieved pillars %s", pillars)
return pillars
def _get_cache_dir():
"""
Get pillar cache directory. Initialize it if it does not exist.
"""
cache_dir = os.path.join(__opts__["cachedir"], "pillar_s3fs")
if not os.path.isdir(cache_dir):
log.debug("Initializing S3 Pillar Cache")
os.makedirs(cache_dir)
return cache_dir
def _get_cached_file_name(bucket, saltenv, path):
"""
Return the cached file name for a bucket path file
"""
file_path = os.path.join(_get_cache_dir(), saltenv, bucket, path)
# make sure bucket and saltenv directories exist
if not os.path.exists(os.path.dirname(file_path)):
os.makedirs(os.path.dirname(file_path))
return file_path
def _get_buckets_cache_filename(bucket, prefix):
"""
Return the filename of the cache for bucket contents.
Create the path if it does not exist.
"""
cache_dir = _get_cache_dir()
if not os.path.exists(cache_dir):
os.makedirs(cache_dir)
return os.path.join(cache_dir, f"{bucket}-{prefix}-files.cache")
def _refresh_buckets_cache_file(creds, cache_file, multiple_env, environment, prefix):
"""
Retrieve the content of all buckets and cache the metadata to the buckets
cache file
"""
# helper s3 query function
def __get_s3_meta(continuation_token=None):
# We want to use ListObjectsV2 so we get the NextContinuationToken
params = {"prefix": prefix, "list-type": 2}
if continuation_token:
params["continuation-token"] = continuation_token
return __utils__["s3.query"](
key=creds.key,
keyid=creds.keyid,
kms_keyid=creds.kms_keyid,
bucket=creds.bucket,
service_url=creds.service_url,
verify_ssl=creds.verify_ssl,
location=creds.location,
return_bin=False,
params=params,
path_style=creds.path_style,
https_enable=creds.https_enable,
)
# grab only the files/dirs in the bucket
def __get_pillar_files_from_s3_meta(s3_meta):
return [k for k in s3_meta if "Key" in k]
# pull out the environment dirs (e.g. the root dirs)
def __get_pillar_environments(files):
environments = [(os.path.dirname(k["Key"]).split("/", 1))[0] for k in files]
return set(environments)
def __get_continuation_token(s3_meta):
return next(
(
item.get("NextContinuationToken")
for item in s3_meta
if item.get("NextContinuationToken")
),
None,
)
log.debug("Refreshing S3 buckets pillar cache file")
metadata = {}
bucket = creds.bucket
if not multiple_env:
# Single environment per bucket
log.debug("Single environment per bucket mode")
bucket_files = {}
s3_meta = __get_s3_meta()
# s3 query returned something
if s3_meta:
bucket_files[bucket] = __get_pillar_files_from_s3_meta(s3_meta)
# Check if we have a NextContinuationToken and loop until we don't
while True:
continuation_token = __get_continuation_token(s3_meta)
if not continuation_token:
break
s3_meta = __get_s3_meta(continuation_token)
bucket_files[bucket] += __get_pillar_files_from_s3_meta(s3_meta)
metadata[environment] = bucket_files
else:
# Multiple environments per buckets
log.debug("Multiple environment per bucket mode")
s3_meta = __get_s3_meta()
# s3 query returned data
if s3_meta:
files = __get_pillar_files_from_s3_meta(s3_meta)
# Check if we have a NextContinuationToken and loop until we don't
while True:
continuation_token = __get_continuation_token(s3_meta)
if not continuation_token:
break
s3_meta = __get_s3_meta(continuation_token)
files += __get_pillar_files_from_s3_meta(s3_meta)
environments = __get_pillar_environments(files)
# pull out the files for the environment
for saltenv in environments:
# grab only files/dirs that match this saltenv.
env_files = [k for k in files if k["Key"].startswith(saltenv)]
if saltenv not in metadata:
metadata[saltenv] = {}
if bucket not in metadata[saltenv]:
metadata[saltenv][bucket] = []
metadata[saltenv][bucket] += env_files
# write the metadata to disk
if os.path.isfile(cache_file):
os.remove(cache_file)
log.debug("Writing S3 buckets pillar cache file")
with salt.utils.files.fopen(cache_file, "wb") as fp_:
pickle.dump(metadata, fp_)
return metadata
def _read_buckets_cache_file(cache_file):
"""
Return the contents of the buckets cache file
"""
log.debug("Reading buckets cache file")
with salt.utils.files.fopen(cache_file, "rb") as fp_:
data = pickle.load(fp_)
return data
def _find_files(metadata):
"""
Looks for all the files in the S3 bucket cache metadata
"""
ret = {}
for bucket, data in metadata.items():
if bucket not in ret:
ret[bucket] = []
# grab the paths from the metadata
filePaths = [k["Key"] for k in data]
# filter out the dirs
ret[bucket] += [k for k in filePaths if not k.endswith("/")]
return ret
def _find_file_meta(metadata, bucket, saltenv, path):
"""
Looks for a file's metadata in the S3 bucket cache file
"""
env_meta = metadata[saltenv] if saltenv in metadata else {}
bucket_meta = env_meta[bucket] if bucket in env_meta else {}
files_meta = list(list(filter((lambda k: "Key" in k), bucket_meta)))
for item_meta in files_meta:
if "Key" in item_meta and item_meta["Key"] == path:
return item_meta
def _get_file_from_s3(creds, metadata, saltenv, bucket, path, cached_file_path):
"""
Checks the local cache for the file, if it's old or missing go grab the
file from S3 and update the cache
"""
# check the local cache...
if os.path.isfile(cached_file_path):
file_meta = _find_file_meta(metadata, bucket, saltenv, path)
file_md5 = (
"".join(list(filter(str.isalnum, file_meta["ETag"]))) if file_meta else None
)
cached_md5 = salt.utils.hashutils.get_hash(cached_file_path, "md5")
# hashes match we have a cache hit
log.debug(
"Cached file: path=%s, md5=%s, etag=%s",
cached_file_path,
cached_md5,
file_md5,
)
if cached_md5 == file_md5:
return
# ... or get the file from S3
__utils__["s3.query"](
key=creds.key,
keyid=creds.keyid,
kms_keyid=creds.kms_keyid,
bucket=bucket,
service_url=creds.service_url,
path=urllib.parse.quote(path),
local_file=cached_file_path,
verify_ssl=creds.verify_ssl,
location=creds.location,
path_style=creds.path_style,
https_enable=creds.https_enable,
)