| Dir : /proc/thread-self/root/proc/self/root/proc/self/root/lib64/perl5/vendor_perl/Compress/Raw/ |
| Server: Linux ngx353.inmotionhosting.com 4.18.0-553.22.1.lve.1.el8.x86_64 #1 SMP Tue Oct 8 15:52:54 UTC 2024 x86_64 IP: 209.182.202.254 |
| Dir : //proc/thread-self/root/proc/self/root/proc/self/root/lib64/perl5/vendor_perl/Compress/Raw/Bzip2.pm |
package Compress::Raw::Bzip2;
use strict ;
use warnings ;
require 5.006 ;
require Exporter;
use Carp ;
use bytes ;
our ($VERSION, $XS_VERSION, @ISA, @EXPORT, $AUTOLOAD);
$VERSION = '2.081';
$XS_VERSION = $VERSION;
$VERSION = eval $VERSION;
@ISA = qw(Exporter);
# Items to export into callers namespace by default. Note: do not export
# names by default without a very good reason. Use EXPORT_OK instead.
# Do not simply export all your public functions/methods/constants.
@EXPORT = qw(
BZ_RUN
BZ_FLUSH
BZ_FINISH
BZ_OK
BZ_RUN_OK
BZ_FLUSH_OK
BZ_FINISH_OK
BZ_STREAM_END
BZ_SEQUENCE_ERROR
BZ_PARAM_ERROR
BZ_MEM_ERROR
BZ_DATA_ERROR
BZ_DATA_ERROR_MAGIC
BZ_IO_ERROR
BZ_UNEXPECTED_EOF
BZ_OUTBUFF_FULL
BZ_CONFIG_ERROR
);
sub AUTOLOAD {
my($constname);
($constname = $AUTOLOAD) =~ s/.*:://;
my ($error, $val) = constant($constname);
Carp::croak $error if $error;
no strict 'refs';
*{$AUTOLOAD} = sub { $val };
goto &{$AUTOLOAD};
}
use constant FLAG_APPEND => 1 ;
use constant FLAG_CRC => 2 ;
use constant FLAG_ADLER => 4 ;
use constant FLAG_CONSUME_INPUT => 8 ;
eval {
require XSLoader;
XSLoader::load('Compress::Raw::Bzip2', $XS_VERSION);
1;
}
or do {
require DynaLoader;
local @ISA = qw(DynaLoader);
bootstrap Compress::Raw::Bzip2 $XS_VERSION ;
};
#sub Compress::Raw::Bzip2::new
#{
# my $class = shift ;
# my ($ptr, $status) = _new(@_);
# return wantarray ? (undef, $status) : undef
# unless $ptr ;
# my $obj = bless [$ptr], $class ;
# return wantarray ? ($obj, $status) : $obj;
#}
#
#package Compress::Raw::Bunzip2 ;
#
#sub Compress::Raw::Bunzip2::new
#{
# my $class = shift ;
# my ($ptr, $status) = _new(@_);
# return wantarray ? (undef, $status) : undef
# unless $ptr ;
# my $obj = bless [$ptr], $class ;
# return wantarray ? ($obj, $status) : $obj;
#}
sub Compress::Raw::Bzip2::STORABLE_freeze
{
my $type = ref shift;
croak "Cannot freeze $type object\n";
}
sub Compress::Raw::Bzip2::STORABLE_thaw
{
my $type = ref shift;
croak "Cannot thaw $type object\n";
}
sub Compress::Raw::Bunzip2::STORABLE_freeze
{
my $type = ref shift;
croak "Cannot freeze $type object\n";
}
sub Compress::Raw::Bunzip2::STORABLE_thaw
{
my $type = ref shift;
croak "Cannot thaw $type object\n";
}
package Compress::Raw::Bzip2;
1;
__END__
=head1 NAME
Compress::Raw::Bzip2 - Low-Level Interface to bzip2 compression library
=head1 SYNOPSIS
use Compress::Raw::Bzip2 ;
my ($bz, $status) = new Compress::Raw::Bzip2 [OPTS]
or die "Cannot create bzip2 object: $bzerno\n";
$status = $bz->bzdeflate($input, $output);
$status = $bz->bzflush($output);
$status = $bz->bzclose($output);
my ($bz, $status) = new Compress::Raw::Bunzip2 [OPTS]
or die "Cannot create bunzip2 object: $bzerno\n";
$status = $bz->bzinflate($input, $output);
my $version = Compress::Raw::Bzip2::bzlibversion();
=head1 DESCRIPTION
C<Compress::Raw::Bzip2> provides an interface to the in-memory
compression/uncompression functions from the bzip2 compression library.
Although the primary purpose for the existence of C<Compress::Raw::Bzip2>
is for use by the C<IO::Compress::Bzip2> and C<IO::Compress::Bunzip2>
modules, it can be used on its own for simple compression/uncompression
tasks.
=head1 Compression
=head2 ($z, $status) = new Compress::Raw::Bzip2 $appendOutput, $blockSize100k, $workfactor;
Creates a new compression object.
If successful, it will return the initialised compression object, C<$z>
and a C<$status> of C<BZ_OK> in a list context. In scalar context it
returns the deflation object, C<$z>, only.
If not successful, the returned compression object, C<$z>, will be
I<undef> and C<$status> will hold the a I<bzip2> error code.
Below is a list of the valid options:
=over 5
=item B<$appendOutput>
Controls whether the compressed data is appended to the output buffer in
the C<bzdeflate>, C<bzflush> and C<bzclose> methods.
Defaults to 1.
=item B<$blockSize100k>
To quote the bzip2 documentation
blockSize100k specifies the block size to be used for compression. It
should be a value between 1 and 9 inclusive, and the actual block size
used is 100000 x this figure. 9 gives the best compression but takes
most memory.
Defaults to 1.
=item B<$workfactor>
To quote the bzip2 documentation
This parameter controls how the compression phase behaves when
presented with worst case, highly repetitive, input data. If
compression runs into difficulties caused by repetitive data, the
library switches from the standard sorting algorithm to a fallback
algorithm. The fallback is slower than the standard algorithm by
perhaps a factor of three, but always behaves reasonably, no matter how
bad the input.
Lower values of workFactor reduce the amount of effort the standard
algorithm will expend before resorting to the fallback. You should set
this parameter carefully; too low, and many inputs will be handled by
the fallback algorithm and so compress rather slowly, too high, and
your average-to-worst case compression times can become very large. The
default value of 30 gives reasonable behaviour over a wide range of
circumstances.
Allowable values range from 0 to 250 inclusive. 0 is a special case,
equivalent to using the default value of 30.
Defaults to 0.
=back
=head2 $status = $bz->bzdeflate($input, $output);
Reads the contents of C<$input>, compresses it and writes the compressed
data to C<$output>.
Returns C<BZ_RUN_OK> on success and a C<bzip2> error code on failure.
If C<appendOutput> is enabled in the constructor for the bzip2 object, the
compressed data will be appended to C<$output>. If not enabled, C<$output>
will be truncated before the compressed data is written to it.
=head2 $status = $bz->bzflush($output);
Flushes any pending compressed data to C<$output>.
Returns C<BZ_RUN_OK> on success and a C<bzip2> error code on failure.
=head2 $status = $bz->bzclose($output);
Terminates the compressed data stream and flushes any pending compressed
data to C<$output>.
Returns C<BZ_STREAM_END> on success and a C<bzip2> error code on failure.
=head2 Example
=head1 Uncompression
=head2 ($z, $status) = new Compress::Raw::Bunzip2 $appendOutput, $consumeInput, $small, $verbosity, $limitOutput;
If successful, it will return the initialised uncompression object, C<$z>
and a C<$status> of C<BZ_OK> in a list context. In scalar context it
returns the deflation object, C<$z>, only.
If not successful, the returned uncompression object, C<$z>, will be
I<undef> and C<$status> will hold the a I<bzip2> error code.
Below is a list of the valid options:
=over 5
=item B<$appendOutput>
Controls whether the compressed data is appended to the output buffer in the
C<bzinflate>, C<bzflush> and C<bzclose> methods.
Defaults to 1.
=item B<$consumeInput>
=item B<$small>
To quote the bzip2 documentation
If small is nonzero, the library will use an alternative decompression
algorithm which uses less memory but at the cost of decompressing more
slowly (roughly speaking, half the speed, but the maximum memory
requirement drops to around 2300k).
Defaults to 0.
=item B<$limitOutput>
The C<LimitOutput> option changes the behavior of the C<< $i->bzinflate >>
method so that the amount of memory used by the output buffer can be
limited.
When C<LimitOutput> is used the size of the output buffer used will either
be the 16k or the amount of memory already allocated to C<$output>,
whichever is larger. Predicting the output size available is tricky, so
don't rely on getting an exact output buffer size.
When C<LimitOutout> is not specified C<< $i->bzinflate >> will use as much
memory as it takes to write all the uncompressed data it creates by
uncompressing the input buffer.
If C<LimitOutput> is enabled, the C<ConsumeInput> option will also be
enabled.
This option defaults to false.
=item B<$verbosity>
This parameter is ignored.
Defaults to 0.
=back
=head2 $status = $z->bzinflate($input, $output);
Uncompresses C<$input> and writes the uncompressed data to C<$output>.
Returns C<BZ_OK> if the uncompression was successful, but the end of the
compressed data stream has not been reached. Returns C<BZ_STREAM_END> on
successful uncompression and the end of the compression stream has been
reached.
If C<consumeInput> is enabled in the constructor for the bunzip2 object,
C<$input> will have all compressed data removed from it after
uncompression. On C<BZ_OK> return this will mean that C<$input> will be an
empty string; when C<BZ_STREAM_END> C<$input> will either be an empty
string or will contain whatever data immediately followed the compressed
data stream.
If C<appendOutput> is enabled in the constructor for the bunzip2 object,
the uncompressed data will be appended to C<$output>. If not enabled,
C<$output> will be truncated before the uncompressed data is written to it.
=head1 Misc
=head2 my $version = Compress::Raw::Bzip2::bzlibversion();
Returns the version of the underlying bzip2 library.
=head1 Constants
The following bzip2 constants are exported by this module
BZ_RUN
BZ_FLUSH
BZ_FINISH
BZ_OK
BZ_RUN_OK
BZ_FLUSH_OK
BZ_FINISH_OK
BZ_STREAM_END
BZ_SEQUENCE_ERROR
BZ_PARAM_ERROR
BZ_MEM_ERROR
BZ_DATA_ERROR
BZ_DATA_ERROR_MAGIC
BZ_IO_ERROR
BZ_UNEXPECTED_EOF
BZ_OUTBUFF_FULL
BZ_CONFIG_ERROR
=head1 SEE ALSO
L<Compress::Zlib>, L<IO::Compress::Gzip>, L<IO::Uncompress::Gunzip>, L<IO::Compress::Deflate>, L<IO::Uncompress::Inflate>, L<IO::Compress::RawDeflate>, L<IO::Uncompress::RawInflate>, L<IO::Compress::Bzip2>, L<IO::Uncompress::Bunzip2>, L<IO::Compress::Lzma>, L<IO::Uncompress::UnLzma>, L<IO::Compress::Xz>, L<IO::Uncompress::UnXz>, L<IO::Compress::Lzop>, L<IO::Uncompress::UnLzop>, L<IO::Compress::Lzf>, L<IO::Uncompress::UnLzf>, L<IO::Uncompress::AnyInflate>, L<IO::Uncompress::AnyUncompress>
L<IO::Compress::FAQ|IO::Compress::FAQ>
L<File::GlobMapper|File::GlobMapper>, L<Archive::Zip|Archive::Zip>,
L<Archive::Tar|Archive::Tar>,
L<IO::Zlib|IO::Zlib>
The primary site for the bzip2 program is L<http://www.bzip.org>.
See the module L<Compress::Bzip2|Compress::Bzip2>
=head1 AUTHOR
This module was written by Paul Marquess, C<pmqs@cpan.org>.
=head1 MODIFICATION HISTORY
See the Changes file.
=head1 COPYRIGHT AND LICENSE
Copyright (c) 2005-2018 Paul Marquess. All rights reserved.
This program is free software; you can redistribute it and/or
modify it under the same terms as Perl itself.