| Dir : /proc/thread-self/root/proc/self/root/proc/self/root/proc/self/root/proc/self/root/bin/ |
| Server: Linux ngx353.inmotionhosting.com 4.18.0-553.22.1.lve.1.el8.x86_64 #1 SMP Tue Oct 8 15:52:54 UTC 2024 x86_64 IP: 209.182.202.254 |
| Dir : //proc/thread-self/root/proc/self/root/proc/self/root/proc/self/root/proc/self/root/bin/pmiectl |
#!/bin/sh
#
# Control program for managing pmlogger and pmie instances.
#
# Copyright (c) 2020 Ken McDonell. All Rights Reserved.
# Copyright (c) 2021 Red Hat.
#
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the
# Free Software Foundation; either version 2 of the License, or (at your
# option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# for more details.
#
# TODO
# - more than 1 -c option ... what does it mean? the current code simply
# and silently uses the last -c option from the command line (this
# warrants at least a warning) ... if supported the likely semantics
# are the union of the named classes ... unless this is allowed, a regex
# pattern for the -c arg (classname) makes no sense
# - regex expansion for <class>
# - other sections in the "policy" files, especially with pmfind to
# (a) at destroy, decide not to or wait some time before destroying
# (the latter is really hard)
#
. "$PCP_DIR/etc/pcp.env"
. "$PCP_SHARE_DIR/lib/rc-proc.sh"
prog=`basename "$0"`
case "$prog"
in
pmlogctl*) IAM=pmlogger
CONTROLFILE=$PCP_PMLOGGERCONTROL_PATH
;;
pmiectl*) IAM=pmie
CONTROLFILE=$PCP_PMIECONTROL_PATH
;;
*) echo >&2 "$0: who the hell are you, bozo?"
exit 1
;;
esac
CONTROLDIR=${CONTROLFILE}.d
tmp=`mktemp -d "$PCP_TMPFILE_DIR/$prog.XXXXXXXXX"` || exit 1
status=0
_cleanup()
{
[ -n "$ACTION" -a "$ACTION" != status ] && _unlock
rm -rf $tmp
}
trap "_cleanup; exit \$status" 0 1 2 3 15
cat >$tmp/usage <<End-of-File
# Usage: [options] command [host ...]
Options:
-a,--all apply action to all matching hosts
-c=NAME,--class=NAME ${IAM} instances belong to the NAME class [default: default]
-f,--force force action if possible
-i=IDENT,--ident=IDENT over-ride instance id (only for create and cond-create)
-m,--migrate migrate matching processes to farm services (for create and check)
-N,--showme perform a dry run, showing what would be done
-p=POLICY,--policy=POLICY use POLICY as the class policy file [default: $PCP_ETC_DIR/pcp/${IAM}/class.d/<class>]
-V,--verbose increase verbosity
--help
End-of-File
_warning()
{
echo >&2 "Warning: $1"
}
_error()
{
echo >&2 "Error: $1"
status=1
exit
}
_lock()
{
$SHOWME && return
# can assume $__dir is writeable ... if we get this far we're running
# as root ...
#
__dir="$PCP_ETC_DIR/pcp/${IAM}"
# demand mutual exclusion
#
rm -f $tmp/stamp $tmp/out
__delay=200 # 1/10 of a second, so max wait is 20 sec
while [ $__delay -gt 0 ]
do
if pmlock -v "$__dir/lock" >>$tmp/out 2>&1
then
echo "$$" >"$__dir/lock"
break
else
[ -f $tmp/stamp ] || touch -t `pmdate -30M %Y%m%d%H%M` $tmp/stamp
find $tmp/stamp -newer "$__dir/lock" -print 2>/dev/null >$tmp/tmp
if [ -s $tmp/tmp ]
then
if [ -f "$__dir/lock" ]
then
_warning "removing lock file older than 30 minutes (PID `cat $__dir/lock`)"
LC_TIME=POSIX ls -l "$__dir/lock"
rm -f "$__dir/lock"
else
# there is a small timing window here where pmlock
# might fail, but the lock file has been removed by
# the time we get here, so just keep trying
#
:
fi
fi
fi
pmsleep 0.1
__delay=`expr $__delay - 1`
done
if [ $__delay -eq 0 ]
then
# failed to gain mutex lock
#
if [ -f "$__dir/lock" ]
then
_warning "is another $prog job running concurrently?"
LC_TIME=POSIX ls -l "$__dir/lock"
else
_error "`cat $tmp/out`"
fi
_error "failed to acquire exclusive lock ($__dir/lock) ..."
return 1
else
if $VERY_VERBOSE
then
echo "Lock acquired `cat $__dir/lock` `ls -l $__dir/lock`"
fi
fi
return 0
}
_unlock()
{
$SHOWME && return
__dir="$PCP_ETC_DIR/pcp/${IAM}"
if [ -f "$__dir/lock" ]
then
rm -f "$__dir/lock"
$VERY_VERBOSE && echo "Lock released"
fi
}
# FreeBSD's egrep does not support -r nor -Z
#
# This variant accepts -r or -rl as the first argument ...
# -r always outputs the filename at the start of the line (no matter
# how may filenames are processed, followed by a | (using a : causes
# all manner of problems with the hostname local:) followed by line
# of text from the file that matches the pattern
#
_egrep()
{
if [ "$1" = "-rl" ]
then
__text=false
elif [ "$1" = "-r" ]
then
__text=true
else
echo >&2 "Botch: _egrep() requires -r or -rl, not $1"
return
fi
shift
__pat="$1"
shift
# skip errors from find(1) and egrep(1), only interested in matches for
# real, existing files
#
find "$@" -type f 2>/dev/null \
| while read __f
do
if echo "$__f" | grep -q -e '\.rpmsave$' -e '\.rpmnew$' -e '\.rpmorig$' \
-e '\.dpkg-dist$' -e '\.dpkg-old$' -e '\.dpkg-new$' >/dev/null 2>&1
then
# ignore backup packaging files (daily and check scripts warn).
continue
fi
# possible race here with async execution of ${IAM}_check removing
# the file after find saw it ... so check again for existance
#
[ -f "$__f" ] && egrep "$__pat" "$__f" 2>/dev/null >$tmp/_egrep
if [ -s $tmp/_egrep ]
then
if $__text
then
sed -e "s;^;$__f|;" $tmp/_egrep
else
echo "$__f"
fi
fi
done
rm -f $tmp/_egrep
}
_usage()
{
pmgetopt --progname=$prog --config=$tmp/usage --usage 2>&1 \
| sed >&2 -e 's/ \[default/\
[default/'
cat >&2 <<End-of-File
Avaliable commands:
[-c classname] create host ...
{-c classname|-i ident} cond-create host ...
[-c classname] {start|stop|restart|destroy|check|status} [host ...]
and host may be a valid hostname or an egrep(1) pattern that matches
the start of a hostname
End-of-File
status=1
exit
}
# find matching hosts from command line args ...
# 1. find control lines that contain each named host (or all hosts in the
# case of no hosts on the command line)
# 2. if --class is specified, then restrict the hosts from 1. to those that
# are in the named class
#
# Output file $tmp/args has this format
# <controlfile> <class> <host> <primary> <socks> <dir> <args> ...
#
_get_matching_hosts()
{
rm -f $tmp/args
if [ $# -eq 0 ]
then
# this regexp matches the start of all possible lines that
# could be ${IAM} control lines, e.g
# somehostname n ...
#
set -- '[^#$]'
fi
for host
do
$VERY_VERBOSE && echo "Looking for host $host in class $CLASS ..."
rm -f $tmp/primary_seen
if [ "$host" = "$LOCALHOST" ]
then
pat="($host|LOCALHOSTNAME)"
else
pat="$host"
fi
_egrep -r "^($pat|#!#$pat)" $CONTROLFILE $CONTROLDIR \
| sed -e 's/|/ /' \
| while read ctl_file ctl_line
do
# the pattern above returns all possible control lines, but
# may need some further culling
#
ctl_host="`echo "$ctl_line" | sed -e 's/[ ].*//'`"
if echo "$host" | grep '^[a-zA-Z0-9][a-zA-Z0-9.-]*$' >/dev/null
then
# $host is a syntactically correct hostname so we need
# an exact match on the first field (up to the first white
# space)
#
if [ "$ctl_host" = "$pat" -o "$ctl_host" = "#!#$pat" ]
then
:
elif [ "$host" = "$LOCALHOST" ]
then
if [ "$ctl_host" = "LOCALHOSTNAME" -o "$ctl_host" = "#!#LOCALHOSTNAME" ]
then
:
else
# false match
continue
fi
else
# false match
continue
fi
else
# otherwise assume $host is a regexp and this could match
# all manner of lines, including comments (consider .*pat)
#
if echo "$ctl_host" | egrep "^($pat|#!#$pat)" >/dev/null
then
# so far so good (matches first field, not just whole
# line ... still some false matches to weed out
#
ok=false
case "$ctl_host"
in
\#!\#*)
ok=true
;;
\#*)
;;
*)
ok=true
;;
esac
$ok || continue;
else
# false match
continue
fi
fi
ctl_line=`echo "$ctl_line" | _expand_control | sed -e 's/^#!#//'`
check=`echo "$ctl_line" | wc -w | sed -e 's/ //g'`
if [ "$check" -lt 4 ]
then
# bad control line ... missing at least directory, so warn and
# ignore
#
_warning "$ctl_file: insufficient fields in control line for host `echo "$ctl_line" | sed -e 's/ .*//'`"
continue
fi
primary=`echo "$ctl_line" | $PCP_AWK_PROG '{ print $2 }'`
if [ "$primary" = y ]
then
touch $tmp/primary_seen
if $EXPLICIT_CLASS || [ "$ACTION" = status ]
then
# primary is not a concern here
#
:
else
# don't dink with the primary ... systemctl (or the
# "rc" script) must be used to control the primary ${IAM}
#
if [ "$ACTION" != "check" ]; then
_warning "$ctl_file: cannot $ACTION the primary ${IAM} from $prog"
fi
continue
fi
fi
echo "$ctl_file" "$ctl_line"
done >$tmp/tmp
if $VERY_VERBOSE
then
echo "Candidate control files:"
sed -e 's/ .*//' <$tmp/tmp \
| LC_COLLATE=POSIX sort \
| uniq
fi
if $EXPLICIT_CLASS
then
cat $tmp/tmp \
| while read control host primary socks dir args
do
if [ "$primary" = y ]
then
class="primary"
else
class=`_get_class "$control" "$host" "$dir"`
fi
if [ "$class" = "$CLASS" ]
then
echo "$control" "$class" "$host" "$primary" "$socks" "$dir" "$args" >>$tmp/tmp2
elif [ -z "$class" -a "$CLASS" = default ]
then
echo "$control" default "$host" "$primary" "$socks" "$dir" "$args" >>$tmp/tmp2
else
$VERY_VERBOSE && echo "No match for control $control host $host directory $dir class $class"
fi
done
if [ -s $tmp/tmp2 ]
then
mv $tmp/tmp2 $tmp/tmp
else
rm $tmp/tmp
touch $tmp/tmp
fi
if $VERY_VERBOSE
then
echo "Matching control files:"
sed -e 's/ .*//' $tmp/tmp
fi
else
# add "class" of "-" to make $tmp/tmp format the same in
# both cases
#
sed <$tmp/tmp >$tmp/tmp2 -e 's/ / - /'
mv $tmp/tmp2 $tmp/tmp
fi
ninst=`wc -l <$tmp/tmp | sed -e 's/ //g'`
if [ "$ninst" -eq 0 ]
then
if [ "$ACTION" = create ]
then
# that's good ...
:
elif $FIND_ALL_HOSTS
then
if $EXPLICIT_CLASS
then
_warning "no host defined in class $CLASS for any ${IAM} control file"
elif [ -f $tmp/primary_seen ]
then
# Warning reported above, don't add chatter here
#
:
else
_warning "no host defined in any ${IAM} control file"
fi
else
if $EXPLICIT_CLASS
then
_warning "host $host not defined in class $CLASS for any ${IAM} control file"
elif [ -f $tmp/primary_seen ]
then
# Warning reported above, don't add chatter here
#
:
else
_warning "host $host not defined in any ${IAM} control file"
fi
fi
continue
fi
if [ "$ACTION" != status ]
then
$PCP_AWK_PROG <$tmp/tmp '$4 != "?" { print $3 }' \
| LC_COLLATE=POSIX sort \
| uniq -c \
| grep -v ' 1 ' >$tmp/tmp2
if [ -s $tmp/tmp2 ] && ! $DOALL
then
dups=`$PCP_AWK_PROG <$tmp/tmp2 '{ print $2 }' | tr '\012' ' ' | sed -e 's/ *$//'`
if $EXPLICIT_CLASS
then
_error "host(s) ($dups) defined in class $CLASS multiple times, don't know which instance to $ACTION"
else
_error "host(s) ($dups) defined multiple times, don't know which instance to $ACTION"
fi
fi
fi
cat $tmp/tmp >>$tmp/args
done
if [ -f $tmp/args ]
then
if $VERY_VERBOSE
then
echo "_get_matching_hosts results:"
echo "# control class host dir"
cat $tmp/args \
| while read control class host primary socks dir other
do
echo "$control $class $host $dir"
done
echo "# end"
fi
fi
}
# get class for a specific ${IAM} instance
# $1 = control
# $2 = host (expanded) [need to match either expanded or unexpanded names]
# $3 = directory (expanded) [need to match unexpanded name]
#
_get_class()
{
control="$1"
# need space at end so hostname looks like it does in a control line
host="`echo "$2 " | _unexpand_control | sed -e 's/ $//'`"
dir="`echo "$3" | _unexpand_control`"
class=`$PCP_AWK_PROG <"$control" '
BEGIN { class = "" }
/^[$]class=/ { class = $1; sub(/[$]class=/,"",class) }
$4 == "'"$dir"'" { if ($1 == "'"$host"'" || $1 == "#!#'"$host"'" ||
$1 == "'"$2"'" || $1 == "#!#'"$2"'") {
print class
exit
}
}'`
[ -z "$class" ] && class=default
echo "$class"
}
# $1 is policy file (known to already exist)
# $2 is section name (expect alphabetic(s): at start of line)
#
_get_policy_section()
{
$PCP_AWK_PROG <"$1" '
NF == 0 { next }
$1 == "['"$2"']" { want = 1; next }
$1 ~ /^\[[a-z]*]$/ { want = 0; next }
want == 1 { print }'
}
# find the PID for the ${IAM} that is dinking in the $1 directory
#
_get_pid()
{
if [ ${IAM} = pmlogger ]
then
_egrep -rl "^$1/[^/]*$" $PCP_TMP_DIR/${IAM} \
| sed -e 's;.*/;;' \
| grep -f $tmp/pids
else
$PCP_BINADM_DIR/pmie_dump_stats $PCP_TMP_DIR/${IAM}/* 2>&1 \
| grep ":logfile=$1" \
| sed -e 's/:.*//' \
| grep -f $tmp/pids
fi
}
# do what ${IAM}_check does to a control line in terms of variable
# expansion
#
_expand_control()
{
sed \
-e 's/[ ][ ]*/ /g' \
-e "s;PCP_ARCHIVE_DIR/;$PCP_LOG_DIR/pmlogger/;g" \
-e "s;PCP_LOG_DIR/;$PCP_LOG_DIR/;g" \
-e "s/^LOCALHOSTNAME /$LOCALHOST /g" \
-e "s/\\([^a-zA-Z0-9]\\)LOCALHOSTNAME/\\1$LOCALHOST/g" \
# end
}
# reverse the changes from _expand_control()
#
_unexpand_control()
{
sed \
-e "s;$PCP_LOG_DIR/pmlogger/;PCP_ARCHIVE_DIR/;g" \
-e "s;$PCP_LOG_DIR/;PCP_LOG_DIR/;g" \
-e "s/^$LOCALHOST /LOCALHOSTNAME /g" \
-e "s/\\([^a-zA-Z0-9]\\)$LOCALHOST/\\1LOCALHOSTNAME/g" \
# end
}
# verbose diagosis of failed state
# $1 = host
# $2 = dir (pmlogger) or logfile (pmie)
#
_diagnose()
{
if [ ${IAM} = pmlogger ]
then
if [ -f "$2/pmlogger.log" ]
then
sed <"$2/pmlogger.log" \
-e '/^[ ]*$/d' \
-e '/^preprocessor cmd:/d' \
-e '/^Config parsed/d' \
-e '/^Group \[/,/^} logged/d' \
-e 's/^/ + /' \
# end
else
echo " + pmlogger.log not available"
fi
else
# TODO ... need some filtering here for pmie logs
if [ -f "$2" ]
then
sed <"$2" \
-e '/^[ ]*$/d' \
-e 's/^/ + /' \
# end
else
echo " + pmie.log not available"
fi
fi
}
# check ${IAM} really started
#
# $1 = dir as it appears on the $PCP_TMP_DIR/${IAM} files (so a real path,
# not a possibly sybolic path from a control file)
#
_check_started()
{
$SHOWME && return 0
dir="$1"
max=600 # 1/10 of a second, so 1 minute max
i=0
$VERY_VERBOSE && $PCP_ECHO_PROG $PCP_ECHO_N "Started? ""$PCP_ECHO_C"
while [ $i -lt $max ]
do
$VERY_VERBOSE && $PCP_ECHO_PROG $PCP_ECHO_N ".""$PCP_ECHO_C"
# rebuild active pids list, then check for our $dir
_get_pids_by_name ${IAM} | sed -e 's/.*/^&$/' >$tmp/pids
pid=`_get_pid "$dir"`
[ -n "$pid" ] && break
i=`expr $i + 1`
pmsleep 0.1
done
if [ -z "$pid" ]
then
$VERY_VERBOSE && $PCP_ECHO_PROG " no"
_warning "${IAM} failed to start for host $host and directory $dir"
sts=1
else
$VERY_VERBOSE && $PCP_ECHO_PROG " yes"
if $MIGRATE
then
# Add new process to the farm service (pmlogger_farm or pmie_farm).
# It will be removed automatically if/when it exits.
$VERBOSE && vflag="-v"
migrate_pid_service $vflag "$pid" ${IAM}_farm.service
fi
sts=0
fi
return $sts
}
# check ${IAM} really stopped
#
# $1 = dir as it appears on the $PCP_TMP_DIR/${IAM} files (so a real path,
# not a possibly sybolic path from a control file)
#
_check_stopped()
{
$SHOWME && return 0
dir="$1"
max=50 # 1/10 of a second, so 5 secs max
i=0
$VERY_VERBOSE && $PCP_ECHO_PROG $PCP_ECHO_N "Stopped? ""$PCP_ECHO_C"
while [ $i -lt $max ]
do
$VERY_VERBOSE && $PCP_ECHO_PROG $PCP_ECHO_N ".""$PCP_ECHO_C"
# rebuild active pids list, then check for our $dir
_get_pids_by_name ${IAM} | sed -e 's/.*/^&$/' >$tmp/pids
pid=`_get_pid "$dir"`
[ -z "$pid" ] && break
i=`expr $i + 1`
pmsleep 0.1
done
if [ -n "$pid" ]
then
$VERY_VERBOSE && $PCP_ECHO_PROG " no"
_warning "${IAM} failed to stop for host $host and directory $dir (PID=$pid)"
sts=1
else
$VERY_VERBOSE && $PCP_ECHO_PROG " yes"
sts=0
fi
return $sts
}
# status command
#
_do_status()
{
if [ ${IAM} = pmlogger ]
then
if $VERBOSE
then
fmt="%-20s %-17s %-8s %7s %-8s %s\n"
else
fmt="%-20s %-17s %-8s %7s %-8s\n"
fi
else
if $VERBOSE
then
fmt="%-20s %5s %11s %-8s %7s %-8s %s\n"
else
fmt="%-20s %5s %11s %-8s %7s %-8s\n"
fi
fi
PICK_HOSTS=false
[ -s $tmp/args ] && PICK_HOSTS=true
# see if system-level controls have stopped (all) ${IAM} processes
#
systemctl_state=''
if which systemctl >/dev/null 2>&1
then
if [ -n "$PCP_SYSTEMDUNIT_DIR" -a -f "$PCP_SYSTEMDUNIT_DIR/${IAM}.service" ]
then
# systemctl is handling this
#
if [ "`systemctl is-enabled ${IAM}.service`" = enabled ]
then
if [ "`systemctl is-active ${IAM}.service`" = inactive ]
then
systemctl_state='stopped by systemctl'
fi
else
systemctl_state='disabled by systemctl'
fi
fi
fi
if [ ${IAM} = pmlogger ]
then
# for pmlogger the entry here is the full pathname of
# the current archive
#
find $PCP_TMP_DIR/${IAM} -type f -a ! -name primary \
| while read f
do
# skip entries if the process is no longer running
#
_pid=`echo "$f" \
| sed -e "s;^$PCP_TMP_DIR/${IAM}/;;" \
| grep -f $tmp/pids`
[ -z "$_pid" ] && continue
sed -n -e 3p $f \
| _expand_control
done >>$tmp/archive
else
# for pmie, the entry here is ...
# pid:logfile:eval_actual
#
$PCP_BINADM_DIR/pmie_dump_stats $PCP_TMP_DIR/pmie/* 2>&1 \
| $PCP_AWK_PROG -F':' '
BEGIN { OFS = ":" }
$2 ~ /logfile=/ { logfile = $2
sub(/^logfile=/,"",logfile)
}
$2 ~ /numrules=/ { rules = $2
sub(/^numrules=/,"",rules)
}
$2 ~ /eval_actual=/ { evals = $2
sub(/^eval_actual=/,"",evals)
print $1,logfile,rules,evals
}' \
| _expand_control >$tmp/pmiestats
fi
find $CONTROLFILE $CONTROLDIR -type f 2>/dev/null \
| while read control
do
class=''
sed <"$control" -n \
-e '/^[^#]/p' \
-e '/^#!#/p ' \
| _expand_control \
| while read host primary socks dir args
do
state=running
case "$host"
in
\$class=*) class=`echo "$host" | sed -e 's/.*=//'`
continue
;;
\$*) continue
;;
\#!\#*) host=`echo "$host" | sed -e 's/^#!#//'`
state="stopped by $prog"
;;
esac
if [ -z "$dir" ]
then
# bad control line ... already reported in
# _get_matching_hosts() before _do_status() was called,
# so silently ignore it here
#
continue
fi
if $PICK_HOSTS
then
# remove this one from $tmp/args ... so at the end we can
# see if any have been missed
#
rm -f $tmp/match
$PCP_AWK_PROG <$tmp/args >$tmp/tmp '
BEGIN { found = 0 }
found == 0 && $3 == "'"$host"'" && $6 == "'"$dir"'" { print NR >>"'$tmp/match'"; found = 1; next }
{ print }'
if [ -f $tmp/match ]
then
mv $tmp/tmp $tmp/args
else
continue
fi
fi
archive=''
evals=''
if [ ${IAM} = pmlogger ]
then
archive=`grep "^$dir/[^/]*$" $tmp/archive \
| sed -e 's;.*/;;'`
check=`echo "$archive" | wc -l | sed -e 's/ //g'`
if [ "$check" -gt 1 ]
then
cat >&2 $tmp/archive
ls >&2 -l $PCP_TMP_DIR/${IAM}
_error "Botch: more than one archive matches directory $dir"
fi
pid=`_egrep -rl "^$dir/[^/]*$" $PCP_TMP_DIR/${IAM} \
| sed -e 's;.*/;;' \
| grep -f $tmp/pids`
[ -z "$archive" ] && archive='?'
[ -z "$pid" ] && pid='?'
else
pid=''
rules=''
evals=''
eval `$PCP_AWK_PROG -F':' <$tmp/pmiestats '$2 == "'"$dir"'" { print "pid=" $1 " rules=" $3 " evals=" $4 }'`
[ -z "$pid" ] && pid='?'
[ -z "$rules" ] && rules='?'
[ -z "$evals" ] && evals='?'
fi
[ -z "$class" ] && class=default
if [ "$archive" = '?' -o "$evals" = '?' ]
then
if [ "$state" = running ]
then
if [ -n "$systemctl_state" ]
then
state="$systemctl_state"
else
state="dead"
fi
fi
fi
$VERBOSE && state="$state|$dir"
if [ "$primary" = y ]
then
# "primary" is a pseudo-class and in particular don't set
# $class as this may screw up the next pmlogger/pmie line
# (if any) in this control file
#
if [ ${IAM} = pmlogger ]
then
printf "$fmt" "$host" "$archive" "primary" "$pid" "$state"
else
printf "$fmt" "$host" "$rules" "$evals" "primary" "$pid" "$state"
fi
else
if [ ${IAM} = pmlogger ]
then
printf "$fmt" "$host" "$archive" "$class" "$pid" "$state"
else
printf "$fmt" "$host" "$rules" "$evals" "$class" "$pid" "$state"
fi
fi
done
done \
| LC_COLLATE=POSIX sort >$tmp/out
if [ -s $tmp/out ]
then
if [ ${IAM} = pmlogger ]
then
if $VERBOSE
then
printf "$fmt" "pmcd Host" Archive Class PID State "Instance Id"
else
printf "$fmt" "pmcd Host" Archive Class PID State
fi
else
if $VERBOSE
then
printf "$fmt" "pmcd Host" Rules Evaluations Class PID State "Instance Id"
else
printf "$fmt" "pmcd Host" Rules Evaluations Class PID State
fi
fi
if $VERBOSE
then
if [ ${IAM} = pmlogger ]
then
cat $tmp/out \
| while read host archive class pid state
do
dir=`echo "$state" | sed -e 's/.*|//'`
state=`echo "$state" | sed -e 's/|.*//'`
if [ ${IAM} = pmlogger ]
then
ident=`echo "$dir" | sed -e 's;.*/;;'`
else
ident=`echo "$dir" | sed -e 's;/pmie.log;;' -e 's;.*/;;'`
fi
printf "$fmt" "$host" "$archive" "$class" "$pid" "$state" "$ident"
if [ "$state" = dead ]
then
_diagnose "$host" "$dir"
fi
done
else
cat $tmp/out \
| while read host rules evals class pid state
do
dir=`echo "$state" | sed -e 's/.*|//'`
state=`echo "$state" | sed -e 's/|.*//'`
ident=`echo "$dir" | sed -e 's;/[^/]*$;;' -e 's;.*/;;'`
printf "$fmt" "$host" "$rules" "$evals" "$class" "$pid" "$state" "$ident"
if [ "$state" = dead ]
then
_diagnose "$host" "$dir"
fi
done
fi
else
cat $tmp/out
fi
fi
if [ -s $tmp/args ]
then
echo "No ${IAM} configuration found for:"
cat $tmp/args \
| while read control class args_host primary socks args_dir args
do
if [ X"$class" != X- ]
then
echo " host $args_host directory $args_dir class $class"
else
echo " host $args_host directory $args_dir"
fi
done
fi
}
# build aggregated ${IAM} config file from multiple selected control
# files
#
# $1 = the remote host
# $2 ... = the control files
#
_resolve_configs()
{
_host="$1"
shift
rm -f $tmp/config $tmp/done_conf
rm -f $tmp/config.0 $tmp/config.1 $tmp/config.2 $tmp/config.3
for c
do
sed -n <$c \
-e 's/[ ][ ]*/ /g' \
-e '/^#/d' \
-e '/^\$/d' \
-e '/^ *$/d' \
-e '/ -c/{
s/.*-c *\([^ ]*\).*/\1/p
}' \
| while read config
do
if [ ! -f "$config" ]
then
# config does not exist, would normally expect it to be
# created at the first use in ${IAM}_check ... so do that
# now, unless it has already been done
#
[ -f $tmp/done_conf ] && continue
rm -f $tmp/tmp
if [ ${IAM} = pmlogger ]
then
if ! pmlogconf -c -q -h "$_host" $tmp/tmp </dev/null >$tmp/err 2>&1
then
_warning "pmlogconf failed"
cat $tmp/diag
echo "=== start pmlogconf file ==="
cat $tmp/tmp
echo "=== end pmlogconf file ==="
continue
fi
else
if ! pmieconf -cF -f $tmp/tmp </dev/null 2>$tmp/err 2>&1
then
_warning "pmieconf failed"
cat $tmp/diag
echo "=== start pmieconf file ==="
cat $tmp/tmp
echo "=== end pmieconf file ==="
continue
fi
fi
config=$tmp/tmp
touch $tmp/done_conf
fi
# now have the desired config file for this class ... split
# it into parts:
# 0 - any #! and preamble before the first config or conf lines
# 1 - any pm{log,ie}conf lines
# 2 - any config lines
# 3 - any [access] section
#
rm -f $tmp/[0-3]
$PCP_AWK_PROG <"$config" '
BEGIN { part = 2; state = 0 }
NR == 1 && /^#pmlogconf / { part = 0 }
NR == 1 && /^\/\/ pmieconf-pmie/ { part = 0 }
state == 1 && $1 == "#+" { state = 2; part = 1 }
state == 3 && $1 !~ /^#/ { state = 4; part = 2 }
/^\/\/ --- START GENERATED SECTION (do not change this section) ---/ \
{ part = 1 }
/^\[access]/ { part = 3 }
{ print >"'$tmp/'" part }
/^# DO NOT UPDATE THE INITIAL SECTION OF THIS FILE/ \
{ state = 1 }
/^# DO NOT UPDATE THE FILE ABOVE THIS LINE/ \
{ state = 3 }
/^\/\/ --- END GENERATED SECTION (changes below will be preserved) ---/ \
{ part = 2 }'
if $VERY_VERY_VERBOSE
then
echo "$config split ->"
for p in 0 1 2 3
do
echo "--- part $p ---"
[ -f $tmp/$p ] && cat $tmp/$p
done
echo "--- end parts ---"
fi
if [ -f $tmp/0 ]
then
if [ -f $tmp/config.0 ]
then
: TODO, may be different?
else
mv $tmp/0 $tmp/config.0
fi
fi
# we concat these blocks of pm{log,ie}conf controls and
# config fragments ... pm{log,ie}conf will cull any
# duplicates when the config is regenerated in pm${IAM}_check
#
[ -f $tmp/1 ] && cat $tmp/1 >>$tmp/config.1
# concat these explicit config fragments together
[ -f $tmp/2 ] && cat $tmp/2 >>$tmp/config.2
if [ -f $tmp/3 ]
then
if [ -f $tmp/config.3 ]
then
: TODO, may be different?
else
mv $tmp/3 $tmp/config.3
fi
fi
done
done
# assemble to final config file ...
#
for p in 0 1 2 3
do
[ -f $tmp/config.$p ] && cat $tmp/config.$p >>$tmp/config
done
touch $tmp/config
}
# cond-create command
#
_do_cond_create()
{
sts=0
FROM_COND_CREATE=true
__POLICY="$POLICY" # value on entry, POLICY gets reset below
for host
do
echo 0 >$tmp/condition-true
# if no -p, then we're going to use all the class policy files,
# unless none exist in which case we'll use the default policy.
#
if [ "$__POLICY" = $tmp/policy ]
then
find "$PCP_ETC_DIR/pcp/${IAM}/class.d" -type f \
| sed -e '/class.d\/pmfind$/d' >$tmp/class
if [ -s $tmp/class ]
then
# we have user-defined classes, use 'em first, then
# marker, then the default pmfind class
#
cat $tmp/class
echo "End-of-User-Classes"
echo "$PCP_ETC_DIR/pcp/${IAM}/class.d/pmfind"
else
# fallback to the default pmfind class
#
echo "$PCP_ETC_DIR/pcp/${IAM}/class.d/pmfind"
fi
else
# explicit policy file from command line -p or implicit policy
# file from command line -c ... use that
#
echo "$__POLICY"
fi \
| while read policy
do
if [ "$policy" = "End-of-User-Classes" ]
then
if [ "`cat $tmp/condition-true`" -gt 0 ]
then
$VERY_VERBOSE && echo "host: $host condition true for some class, skip pmfind class"
break
fi
continue
fi
_get_policy_section "$policy" create >$tmp/cond
if [ -s $tmp/cond ]
then
# expect func(args...)
#
sed -e '/^#/d' <$tmp/cond \
| grep -v '[a-z][^(]*(.*)[ ]*$' >$tmp/tmp
if [ -s $tmp/tmp ]
then
_warning "$policy: bad create clause(s) will be ignored"
cat >&2 $tmp/tmp
fi
rm -f $tmp/match
grep '[a-z][^(]*(.*)[ ]*$' <$tmp/cond \
| sed -e 's/(/ /' -e 's/)[ ]*$//' \
| while read func args
do
case "$func"
in
exists)
if pminfo -h "$host" "$args" >/dev/null 2>&1
then
touch $tmp/match
$VERBOSE && echo "$policy: host $host exists($args) true"
break
else
$VERY_VERBOSE && echo "$policy: host $host exists($args) false"
fi
;;
values)
if pmprobe -h "$host" "$args" 2>/dev/null \
| $PCP_AWK_PROG '
BEGIN { sts=1 }
$2 > 0 { sts=0; exit }
END { exit(sts) }'
then
touch $tmp/match
$VERBOSE && echo "$policy: host $host values($args) true"
break
else
$VERY_VERBOSE && echo "$policy: host $host values($args) false"
fi
;;
condition)
echo "pm_ctl.check = $args" >$tmp/derived
PCP_DERIVED_CONFIG=$tmp/derived pmprobe -v -h "$host" pm_ctl.check >$tmp/tmp
numval=`cut -d ' ' -f 2 <$tmp/tmp`
val=`cut -d ' ' -f 3 <$tmp/tmp`
if [ "$numval" -gt 1 ]
then
_warning "$policy: condition($args) has $numval values, not 1 as expected, using first value ($val)"
fi
if [ "$numval" -gt 0 ]
then
if [ "$val" -gt 0 ]
then
touch $tmp/match
$VERBOSE && echo "$policy: host $host condition($args) true, value $val"
break
else
$VERY_VERBOSE && echo "$policy: host $host condition($args) false, value $val"
fi
else
$VERY_VERBOSE && echo "$policy: host $host condition($args) false, numval $numval"
fi
;;
hostname)
if echo "$host" | egrep "$args" >/dev/null
then
touch $tmp/match
$VERBOSE && echo "$policy: host $host hostname($args) true"
else
$VERY_VERBOSE && echo "$policy: host $host hostname($args) false"
break
fi
;;
esac
done
if [ -f $tmp/match ]
then
POLICY="$policy"
if _do_create "$host"
then
# on success $tmp/control is the control file for
# this class
#
n=`cat $tmp/condition-true`
n=`expr $n + 1`
mv $tmp/control $tmp/control.$n
echo "$policy" >$tmp/policy.$n
echo $n >$tmp/condition-true
else
_error "$policy: create failed for host $host"
fi
fi
else
$VERY_VERBOSE && echo "$policy: no [create] section, skip class"
fi
done
n=`cat $tmp/condition-true`
if [ "$n" -eq 0 ]
then
$VERBOSE && _warning "no instance created for host $host"
continue
elif [ "$n" -eq 1 ]
then
# just one class "matches", use the control file from do_create()
#
mv $tmp/control.$n $tmp/control
POLICY="`cat $tmp/policy.1`"
else
# some work to be done ...
#
_resolve_configs "$host" $tmp/control.*
if $VERBOSE
then
echo "--- start combined config file ---"
cat $tmp/config
echo "--- end combined config file ---"
fi
[ -z "$IDENT" ] && IDENT=pmfind-$host
# build a pmfind-like control file
#
if [ ${IAM} = pmlogger ]
then
target_dir=$PCP_ARCHIVE_DIR/$IDENT
cat <<End-of-File >$tmp/control
# DO NOT REMOVE OR EDIT THE FOLLOWING LINE
\$version=1.1
\$class=pmfind
$host n n PCP_ARCHIVE_DIR/$IDENT -c ./$IDENT.config -r
End-of-File
else
target_dir=$PCP_LOG_DIR/pmie/$IDENT
cat <<End-of-File >$tmp/control
# DO NOT REMOVE OR EDIT THE FOLLOWING LINE
\$version=1.1
\$class=pmfind
$host n n PCP_LOG_DIR/pmie/$IDENT/pmie.log -c ./$IDENT.config
End-of-File
fi
if $SHOWME
then
echo + mkdir_and_chown "$target_dir" 755 $PCP_USER:$PCP_GROUP
else
mkdir_and_chown "$target_dir" 755 $PCP_USER:$PCP_GROUP >$tmp/tmp 2>&1
if [ ! -d "$target_dir" ]
then
cat $tmp/tmp
_error "cannot create directory ($target_dir)"
fi
fi
$CP $tmp/config $target_dir/$IDENT.config
fi
# this bit is more or less replicated from do_create(),
# but we don't need to replicate error checking that's
# already been done
#
if [ -n "$IDENT" ]
then
ident="$IDENT"
else
_get_policy_section "$POLICY" ident >$tmp/tmp
if [ -s $tmp/tmp ]
then
ident=`sed -e "s;%h;$host;g" <$tmp/tmp`
else
ident="$host"
fi
fi
dir=`$PCP_AWK_PROG <$tmp/control '
$1 == "'"$host"'" { print $4 }'`
if $VERBOSE
then
echo "--- start control file ---"
cat $tmp/control
echo "--- end control file ---"
fi
$VERBOSE && echo "Installing control file: $CONTROLDIR/$ident"
$CP $tmp/control "$CONTROLDIR/$ident"
$CHECK -c "$CONTROLDIR/$ident"
dir_args="`echo "$dir" | _expand_control`"
_check_started "$dir_args" || sts=1
done
return $sts
}
# create command
#
# if FROM_COND_CREATE is true, we're doing work on behalf of the cond-create
# command, and nothing is installed, but the control file is left in
# $tmp/control to be used back in cond_create()
#
_do_create()
{
sts=0
for host
do
if [ -n "$IDENT" ]
then
# -i from command line ...
#
ident="$IDENT"
else
# -c from command line ...
#
_get_policy_section "$POLICY" ident >$tmp/tmp
if [ -s $tmp/tmp ]
then
check=`wc -w <$tmp/tmp | sed -e 's/ //g'`
[ "$check" -ne 1 ] &&
_error "[ident] section is invalid in $POLICY policy file (expect a single word, not $check words)"
ident=`sed -e "s;%h;$host;g" <$tmp/tmp`
else
ident="$host"
fi
fi
[ -f $CONTROLDIR/"$ident" ] && _error "control file $CONTROLDIR/$ident already exists"
if $EXPLICIT_CLASS
then
# use classname from -c
:
else
# try to extract from [class] section, else fallback to basename
# of the policy file (this was the scheme before the [class]
# section was introduced)
#
CLASS=`_get_policy_section "$POLICY" class`
[ -z "$CLASS" ] && CLASS=`echo "$POLICY" | sed -e 's;.*/;;'`
fi
cat <<End-of-File >$tmp/control
# created by $prog on `date`
End-of-File
_get_policy_section "$POLICY" control >$tmp/tmp
[ ! -s $tmp/tmp ] && _error "[control] section is missing from $POLICY policy file"
if grep '^\$class=' $tmp/tmp >/dev/null
then
:
else
echo "\$class=$CLASS" >>$tmp/control
fi
if grep '^\$version=1.1$' $tmp/tmp >/dev/null
then
:
else
$VERBOSE && echo "Adding \$version=1.1 to control file"
echo '#DO NOT REMOVE OR EDIT THE FOLLOWING LINE' >>$tmp/control
echo '$version=1.1' >>$tmp/control
fi
sed -e "s;%h;$host;g" -e "s;%i;$ident;g" <$tmp/tmp >>$tmp/control
primary=`$PCP_AWK_PROG <$tmp/control '
$1 == "'"$host"'" { print $2 }'`
if [ -z "$primary" ]
then
echo "control file ..."
cat $tmp/control
_error "cannot find primary field from control file"
fi
if [ "$primary" = y ]
then
# don't dink with the primary ... systemctl (or the "rc" script)
# must be used to control the primary ${IAM}
#
_error "primary ${IAM} cannot be created from $prog"
fi
dir=`$PCP_AWK_PROG <$tmp/control '
$1 == "'"$host"'" { print $4 }'`
if [ -z "$dir" ]
then
echo "control file ..."
cat $tmp/control
_error "cannot find directory field from control file"
fi
if [ "$host" = "$LOCALHOST" ]
then
pat_host="($host|LOCALHOSTNAME)"
pat_dir="($dir|`echo "$dir" | sed -e "s;$host;LOCALHOSTNAME;"`)"
else
pat_host="$host"
pat_dir="$dir"
fi
_egrep -rl "^($pat_host|#!#$pat_host)[ ].*[ ]$pat_dir([ ]|$)" $CONTROLFILE $CONTROLDIR >$tmp/out
[ -s $tmp/out ] && _error "host $host and directory $dir already defined in `cat $tmp/out`"
if $FROM_COND_CREATE
then
# skip this part (the real create and start) ...
:
else
if $VERBOSE
then
echo "--- start control file ---"
cat $tmp/control
echo "--- end control file ---"
fi
$VERBOSE && echo "Installing control file: $CONTROLDIR/$ident"
$CP $tmp/control "$CONTROLDIR/$ident"
$CHECK -c "$CONTROLDIR/$ident"
dir_args="`echo "$dir" | _expand_control`"
_check_started "$dir_args" || sts=1
fi
done
return $sts
}
# destroy command
#
_do_destroy()
{
mv $tmp/args $tmp/destroy
cat $tmp/destroy \
| while read control class args_host primary socks args_dir args
do
echo "$control" "$class" "$args_host" "$primary" "$socks" "$args_dir" "$args" >$tmp/args
if _do_stop -q
then
:
else
_error "control file changes skipped because ${IAM} could not be stopped"
fi
dir=`echo "$args_dir" | _unexpand_control`
host=`echo "$args_host " | _unexpand_control | sed -e 's/ $//'`
# need to match either expanded or unexpanded host name, with
# or without #!# prefix
#
$PCP_AWK_PROG <"$control" >$tmp/control '
$1 == "'"$args_host"'" && $4 == "'"$dir"'" { next }
$1 == "'"#!#$args_host"'" && $4 == "'"$dir"'" { next }
$1 == "'"$host"'" && $4 == "'"$dir"'" { next }
$1 == "'"#!#$host"'" && $4 == "'"$dir"'" { next }
{ print }'
if cmp -s "$control" $tmp/control
then
$VERBOSE && echo "${IAM} for host $host and directory $dir already removed from control file $control"
else
if $VERY_VERBOSE
then
echo "Diffs for control file $control after removing host $host and directory $dir ..."
diff "$control" $tmp/control
elif $VERBOSE
then
echo "Remove ${IAM} for host $host and directory $dir in control file $control"
fi
fi
sed -n <$tmp/control >$tmp/tmp -e '/^[^$# ]/p'
if [ -s $tmp/tmp ]
then
# at least one active control line left in $tmp/control ...
# cannot remove it
#
$CP $tmp/control "$control"
else
$VERBOSE && echo "Remove control file $control"
$RM "$control"
fi
done
return 0
}
# start command
#
_do_start()
{
restart=false
[ "$1" = '-r' ] && restart=true
sts=0
cat $tmp/args \
| while read control class args_host primary socks args_dir args
do
$VERBOSE && echo "Looking for ${IAM} using directory $args_dir ..."
pid=`_get_pid "$args_dir"`
if [ -n "$pid" ]
then
$VERBOSE && echo "${IAM} PID $pid already running for host $args_host, nothing to do"
$VERBOSE && $restart && echo "Not expected for restart!"
if $MIGRATE
then
$VERBOSE && vflag="-v"
migrate_pid_service $vflag "$pid" ${IAM}_farm.service
fi
continue
fi
if $VERBOSE
then
if $restart
then
echo "Not found as expected, launching new ${IAM}"
else
echo "Not found, launching new ${IAM}"
fi
fi
if [ ! -f "$control" ]
then
_warning "control file $control for host $args_host ${IAM} has vanished"
sts=1
continue
fi
dir=`echo "$args_dir" | _unexpand_control`
host=`echo "$args_host " | _unexpand_control | sed -e 's/ $//'`
$PCP_AWK_PROG <"$control" >$tmp/control '
$1 == "'"#!#$host"'" && $4 == "'"$dir"'" { sub(/^#!#/,"",$1) }
{ print }'
if cmp -s "$control" $tmp/control
then
if $restart
then
:
else
$VERBOSE && echo "${IAM} for host $host and directory $dir already enabled in control file $control"
fi
else
if $VERY_VERBOSE
then
echo "Diffs for control file $control after enabling host $host and directory $dir ..."
diff "$control" $tmp/control
elif $VERBOSE
then
echo "Enable ${IAM} for host $host and directory $dir in control file $control"
fi
$CP $tmp/control "$control"
fi
$CHECK -c "$control"
_check_started "$args_dir" || sts=1
done
return $sts
}
# check command - start dead hosts, if any
#
_do_check()
{
_do_start $*
}
# stop command
#
_do_stop()
{
skip_control_update=false
[ "$1" = '-q' ] && skip_control_update=true
sts=0
rm -f $tmp/sts
cat $tmp/args \
| while read control class args_host primary socks args_dir args
do
host=`echo "$args_host " | _unexpand_control | sed -e 's/ $//'`
if grep "^#!#$host[ ]" $control >/dev/null
then
_warning "${IAM} for host $host already stopped, nothing to do"
continue
fi
$VERBOSE && echo "Looking for ${IAM} using directory $args_dir ..."
pid=`_get_pid "$args_dir"`
if [ -z "$pid" ]
then
_warning "cannot find PID for host $args_host ${IAM}, already exited?"
else
# $PCPQA_KILL_SIGNAL is only intended for QA tests
#
$VERBOSE && echo "Found PID $pid to stop using signal ${PCPQA_KILL_SIGNAL-TERM}"
$KILL ${PCPQA_KILL_SIGNAL-TERM} $pid
if _check_stopped "$args_dir"
then
:
else
echo 1 >$tmp/sts
continue
fi
fi
$skip_control_update && continue
if [ ! -f "$control" ]
then
_warning "control file $control for host $args_host ${IAM} has vanished"
echo 1 >$tmp/sts
continue
fi
dir=`echo "$args_dir" | _unexpand_control`
$PCP_AWK_PROG <"$control" >$tmp/control '
$1 == "'"$host"'" && $4 == "'"$dir"'" { $1 = "#!#" $1 }
{ print }'
if cmp -s "$control" $tmp/control
then
$VERBOSE && echo "${IAM} for host $host and directory $dir already disabled in control file $control"
else
if $VERY_VERBOSE
then
echo "Diffs for control file $control after disabling host $host and directory $dir ..."
diff "$control" $tmp/control
elif $VERBOSE
then
echo "Disable ${IAM} for host $host and directory $dir in control file $control"
fi
$CP $tmp/control "$control"
fi
done
[ -f $tmp/sts ] && sts="`cat $tmp/sts`"
return $sts
}
# restart command
#
_do_restart()
{
sts=0
mv $tmp/args $tmp/restart
cat $tmp/restart \
| while read control class host primary socks dir args
do
echo "$control" "$class" "$host" "$primary" "$socks" "$dir" "$args" >$tmp/args
if _do_stop -q
then
if _do_start -r
then
:
else
_error "restart failed to start host $host in class $class"
sts=1
fi
else
_error "restart failed to stop host $host in class $class"
sts=1
fi
done
return $sts
}
ARGS=`pmgetopt --progname=$prog --config=$tmp/usage -- "$@"`
[ $? != 0 ] && exit 1
eval set -- "$ARGS"
DOALL=false
FORCE=false
IDENT=''
SHOWME=false
CP=cp
RM=rm
CHECK="sudo -u $PCP_USER -g $PCP_GROUP $PCP_BINADM_DIR/${IAM}_check"
KILL="$PCP_BINADM_DIR/pmsignal -s"
MIGRATE=false
VERBOSE=false
VERY_VERBOSE=false
VERY_VERY_VERBOSE=false
CLASS=default
POLICY=''
EXPLICIT_CLASS=false
ARGS=''
while [ $# -gt 0 ]
do
case "$1"
in
-a) DOALL=true
;;
-c) CLASS="$2"
EXPLICIT_CLASS=true
shift
;;
-f) FORCE=true
;;
-i) IDENT="$2"
shift
;;
-m) MIGRATE=true
;;
-N) SHOWME=true
CP="echo + $CP"
RM="echo + $RM"
CHECK="echo + $CHECK"
KILL="echo + $KILL"
;;
-p) POLICY="$2"
shift
;;
-V) if $VERY_VERBOSE
then
VERY_VERY_VERBOSE=true
elif $VERBOSE
then
VERY_VERBOSE=true
else
VERBOSE=true
fi
;;
--) # we're not being POSIX conformant, want to allow -x options after command
# so skip this one
;;
-*) _usage
# NOTREACHED
;;
*) # this is a non-option arg, gather them up for later
if [ -z "$ARGS" ]
then
ARGS="\"$1\""
else
ARGS="$ARGS \"$1\""
fi
;;
esac
shift
done
eval set -- $ARGS
if [ $# -lt 1 ]
then
_usage
# NOTREACHED
fi
LOCALHOST=`hostname`
ACTION="$1"
shift
if [ -n "$IDENT" ]
then
if [ "$ACTION" != create -a "$ACTION" != cond-create ]
then
_error "-i option may only be used with create or cond-create commands"
fi
fi
if $VERY_VERBOSE
then
if $EXPLICIT_CLASS
then
echo "Using class: $CLASS"
else
echo "Using default class"
fi
fi
[ -z "$POLICY" ] && POLICY="$PCP_ETC_DIR/pcp/${IAM}/class.d/$CLASS"
if [ "$CLASS" = default ]
then
if [ ! -f "$POLICY" ]
then
# This is the _real_ default policy, when there is no
# $PCP_ETC_DIR/pcp/${IAM}/class.d/default
#
cat <<'End-of-File' >$tmp/policy
[class]
default
[ident]
%h
[destroy]
condition(1)
[create]
hostname(.*)
[control]
#DO NOT REMOVE OR EDIT THE FOLLOWING LINE
$version=1.1
End-of-File
if [ ${IAM} = pmlogger ]
then
echo '%h n n PCP_ARCHIVE_DIR/%i -c ./%i.config' >>$tmp/policy
else
echo '%h n n PCP_LOG_DIR/pmie/%i/pmie.log -c ./%i.config' >>$tmp/policy
fi
POLICY=$tmp/policy
$VERY_VERBOSE && echo "Using default policy"
fi
else
if [ ! -f "$POLICY" ]
then
if [ "$ACTION" = create ]
then
_error "policy file $POLICY not found, class $CLASS is not defined so cannot create"
elif [ "$ACTION" = destroy ] && ! $FORCE
then
_error "policy file $POLICY not found, class $CLASS is not defined so cannot destroy"
fi
fi
$VERY_VERBOSE && echo "Using policy: $POLICY"
fi
FIND_ALL_HOSTS=false
FROM_COND_CREATE=false
# don't get confused by processes that exited, but did not cleanup ...
# build a list of runing ${IAM} processes
#
_get_pids_by_name ${IAM} | sed -e 's/.*/^&$/' >$tmp/pids
case "$ACTION"
in
check|create|cond-create|start|stop|restart|destroy)
if [ `id -u` != 0 -a "$SHOWME" = false ]
then
_error "you must be root (uid 0) to change the Performance Co-Pilot logger setup"
fi
# need --class and/or hostname
#
if [ "$ACTION" = "check" ]
then
FIND_ALL_HOSTS=true
elif [ $# -eq 0 ]
then
$EXPLICIT_CLASS || _error "\"$ACTION\" command requres hostname(s) and/or a --class"
FIND_ALL_HOSTS=true
fi
_lock
if [ "$ACTION" != create -a "$ACTION" != cond-create ]
then
_get_matching_hosts "$@"
if [ ! -f $tmp/args ]
then
if [ "$ACTION" = check ]
then
# special case: successfully check nothing
status=0
exit
else
_error "no matching host(s) to $ACTION"
exit
fi
fi
fi
# small wrinkle: map - to _ in action, e.g.
# cond-create -> cond_create, so it is a valid shell
# function name
#
eval "_do_`echo "$ACTION" | sed -e 's/-/_/g'`" $*
cmd_sts=$?
if [ $cmd_sts -ne 0 ]
then
_error "could not complete $ACTION operation"
fi
;;
status)
[ $# -eq 0 ] && FIND_ALL_HOSTS=true
_get_matching_hosts "$@"
_do_status
;;
*) _error "command \"$ACTION\" not known"
exit
;;
esac
exit